The GE Fanuc IC693PWR324, also cataloged as the IC693PWR324 Power Supply Device, operates as a dedicated hardware component for internal backplane power distribution and AC/DC voltage conversion within Series 90-30 platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693PWR324 |
| Brand | GE Fanuc Emerson |
| Origin | USA |
| Weight | 0.88 lbs (0.40 kg) |
| Dimensions | Standard Series 90-30 single-slot width |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 90 VA / 50 Watts maximum input power |
| Input Voltage Rating | 100 to 240 VAC |
| Input Frequency | 47 to 63 Hz |
| Peak Inrush Current | 4 A maximum |
| Relay Power Output | 24 VDC |
| Ripple and Noise | 50 mV |
| Typical Efficiency | 75% to 85% |
| Galvanic Isolation | 1500 VAC |
| Communication Interface | Integrated RS-485 serial port |
| Status Monitoring | 4 diagnostic LEDs |
| Mounting Format | Backplane-mounted |
Backplane Bus Communication Velocity & Power Distribution
The IC693PWR324 power supply unit converts wide-range AC inputs (100 to 240 VAC at 47 to 63 Hz) to deliver stable output rails across the backplane bus. Designed to maintain backplane bus communication velocity and system execution continuity across Series 90-30 racks, it supplies regulated power output alongside a dedicated 24 VDC relay output. The internal conversion stage achieves typical efficiency levels between 75% and 85% with a low ripple/noise specification of 50 mV. Backplane logic protection is maintained through 1500 VAC isolation, while firmware flash compatibility and local serial networking are supported via an integrated RS-485 communication port and four front-panel diagnostic LEDs.
Frequently Asked Questions
Q: What input power boundaries are supported by the IC693PWR324 power supply?
A: The module accepts primary AC inputs from 100 to 240 VAC at line frequencies between 47 and 63 Hz, drawing up to 90 VA / 50 Watts maximum.
Q: What is the maximum peak inrush current generated during startup?
A: The unit generates a maximum peak inrush current of 4 A upon initial line voltage application.
Q: What onboard interfaces are provided for status monitoring and serial communication?
A: The hardware features four front-panel status LEDs for visual system status updates and an integrated RS-485 serial port for communication connections.
Field Installation Guidelines
- Isolate main AC line power before installing, wiring, or removing the power supply module from the baseplate rack.
- Insert the backplane-mounted IC693PWR324 into the far-left power supply slot on the Series 90-30 baseplate until the rear bus connector fully seats.
- Fasten the panel mounting screws at the top and bottom to ensure frame grounding and mechanical stability under operational vibration.
- Route 100-240 VAC input conductors to the dedicated terminal strip, ensuring wiring complies with local electrical standards.
- Keep high-voltage AC line wiring physically separated from low-voltage RS-485 communications and DC I/O signal lines to limit noise coupling.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading