IC694MDL655 GE Fanuc PACSystems RX3i Datasheet & Technical Manual

GE Fanuc IC694MDL655 PACSystems RX3i Discrete Input Module

GE Fanuc IC694MDL655 PACSystems RX3i Discrete Input Module

Availability: 10 left in stock

Configured for receiving discrete binary field signals in PACSystems RX3i platforms, the GE Fanuc IC694MDL655 (IC694MDL655 Discrete Input Module) provides...

SKU: IC694MDL655

Manufacturer: GE Fanuc
Product No.: IC694MDL655
Product Type: Discrete Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 260g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Configured for receiving discrete binary field signals in PACSystems RX3i platforms, the GE Fanuc IC694MDL655 (IC694MDL655 Discrete Input Module) provides direct physical/electrical execution. This high-density module features 32 distinct input channels divided into four isolated groups of eight, allowing interface capabilities with proximity sensors, limit switches, and pushbuttons.

Hardware Specifications

Parameter	Specification
Model	IC694MDL655
Brand	GE Fanuc Emerson
Origin	United States
Weight	0.26 kg (0.56 lbs)
Dimensions	130 mm x 30 mm x 115 mm (Standard single-slot width)
Operating Temp	0 to 60 deg C
Power Consumption	195 mA maximum @ 5 VDC (backplane), 224 mA typical @ 24 VDC
Number of Channels	32 (4 groups of 8 channels)
Input Voltage Range	0 to 30 VDC
Nominal Input Voltage	24 VDC
Input Current	7.0 mA @ 24 VDC
On-state Voltage	11.5 to 30.0 VDC
Off-state Voltage	0 to 5.0 VDC
On-state Current	3.2 mA minimum
Off-state Current	1.1 mA maximum
Response Time (On/Off)	2 ms maximum
Maximum Cable Length	30 m
Isolation Rating	250 VAC continuous; 1500 VAC for 1 minute (Backplane to Frame Ground)
Group-to-Group Isolation	50 VAC continuous; 500 VAC for 1 minute
Connector Type	Two male 24-pin connectors

I/O Density Scaling & Logic Configuration

The IC694MDL655 provides high-density I/O density scaling by packing 32 discrete channels into a single-slot module width. The circuitry supports both positive and negative logic (sink or source configurations). Wiring configuration is established per group; positive logic requires the positive field conductor connected directly to the input channel with the negative terminal routed to the common, while negative logic reverses this orientation. Isolation boundaries are placed between the four separate input groups to permit independent wiring configurations under varying voltage potentials.

Frequently Asked Questions

Q: Can different input groups on the IC694MDL655 operate with different logic types simultaneously?

A: Yes. Because electrical isolation is maintained between the four groups of eight channels, you can wire one group for positive logic (sinking) and another group for negative logic (sourcing) on the same physical module.

Q: What is the maximum recommended field wiring distance for this module?

A: The maximum cable length for field devices wired to the IC694MDL655 must not exceed 30 meters to limit signal degradation and shield the inputs from electromagnetic noise.

Q: What indication is provided for individual input channel states?

A: The module faceplate features 32 green LED indicators corresponding to each channel. An active LED signifies that the respective input channel is receiving an on-state voltage of 11.5 to 30.0 VDC.

Field Installation Guidelines

Chassis Positioning: Turn off the PACSystems RX3i baseplate power prior to insertion. Insert the module into any available I/O slot on the local rack or a distributed baseplate.
Connector Termination: Secure the field wiring to the two front-facing 24-pin male connectors. Ensure the terminal screws are torqued to prevent loose physical connections.
Shielding and Routing: Run input sensor wiring in dedicated conduits separate from high-voltage AC motor power lines to mitigate cross-talk and transient voltage spikes.
External Power Supply: When powering the field side from an external 24 VDC supply, ensure the supply output does not exceed 30 VDC continuous.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.