IC695ACC403 GE Fanuc RX3i Energy Pack Module

GE Fanuc IC695ACC403 PACSystems RX3i Energy Pack Module

GE Fanuc IC695ACC403 PACSystems RX3i Energy Pack Module

Availability: 10 left in stock

The GE Fanuc IC695ACC403, also cataloged as the IC695ACC403 Energy Pack Module, operates as a dedicated hardware component for memory...

SKU: IC695ACC403

Manufacturer: GE Fanuc
Product No.: IC695ACC403
Product Type: Power Supply Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 340g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The GE Fanuc IC695ACC403, also cataloged as the IC695ACC403 Energy Pack Module, operates as a dedicated hardware component for memory preservation and CPU backup execution within PACSystems RX3i platforms.

Hardware Specifications

Parameter	Specification
Model	IC695ACC403
Brand	GE Fanuc Emerson
Origin	United States
Weight	0.75 lbs (0.34 kg)
Dimensions	Single-slot RX3i mounting footprint
Operating Temp	Standard industrial operating range
Power Consumption	72 W SELV maximum power rating
Input Voltage	24 VDC SELV nominal
Current Rating	2.3 A
Mounting Type	DIN Rail mount
Connection Type	Screw terminals for DC power and grounding
Wire Size	#18 AWG
Enclosure / Environmental	Class I Division 2 hazardous locations (No water splash resistance)
Thermal Requirement	25.4 mm (1 in) minimum clearance for heat dissipation
Status Diagnostics	Integrated LED status indicator

Backplane Bus Communication Velocity and Firmware Flash Compatibility

The IC695ACC403 delivers regulated hold-up energy to the PACSystems RX3i CPU during main supply dropouts, preserving internal system registers and user application memory. By executing autonomous power transfer without disturbing backplane bus communication velocity, the unit prevents controller halt cycles during momentary voltage transients. Firmware flash compatibility across connected CPU modules ensures synchronized diagnostic reporting through the front-panel status LED, maintaining data integrity without hardware jumper reconfiguration.

Frequently Asked Questions

Q: What are the physical clearance requirements when mounting the IC695ACC403 module?

A: The IC695ACC403 requires a minimum clearance of 25.4 mm (1 in) around the unit to facilitate adequate thermal convection and heat dissipation.

Q: Can the IC695ACC403 module be exposed to direct water spray or high moisture environments?

A: No. The IC695ACC403 is not water splash resistant and must be installed inside a protective NEMA or IP-rated enclosure where ambient moisture is managed.

Q: What wire gauge is recommended for connecting power and ground to the screw terminals?

A: The screw terminals on the IC695ACC403 are designed to accept #18 AWG wiring for DC power inputs and frame grounding.

Field Installation Guidelines

Disconnect 24 VDC primary power to the target enclosure before physically mounting the IC695ACC403.
Snap the module securely onto the standard 35 mm DIN rail, maintaining a minimum 25.4 mm (1 in) clearance space above and below the housing for proper heat dissipation.
Wire the 24 VDC SELV power source to the screw terminals using #18 AWG copper conductors, verifying correct wiring polarity.
Connect the frame ground screw terminal directly to the central cabinet functional earth ground bus to ensure SELV electrical isolation compliance.
Apply power to the system and observe the module diagnostic status LED to confirm nominal operating state and hold-up capability.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.