The GE Fanuc IC695CPE330 serves as the primary IC695CPE330 CPU module utilized to execute logic processing and network communication tasks across RX3i PacSystem platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695CPE330 |
| Brand | GE Fanuc Emerson |
| Origin | United States |
| Weight | 1.08 kg (2.38 lbs) |
| Dimensions | Standard 2-slot width module |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 0.0 A at 5 VDC, 0.0 A at 3.3 VDC, 0.625 A at 24 VDC |
| Processor Clock Speed | 1.0 GHz (Core) / 1.6 GHz Dual Core operational profile |
| RAM | 64 MB |
| NVRAM | 64 MB |
| Program Storage | 64 MB User Memory via ICFast / Compactflash |
| Ethernet Ports | 3x RJ-45 (1x Single port LAN 1, 2x Dual port LAN 2 with embedded switch) |
| Port Speeds | 10/100/1000 Mbps (Gigabit supported) |
| Max Program Blocks | 512 blocks (Maximum 128 KB per block) |
| I/O Capacity | Up to 32 K discrete / analog points, 8 local racks maximum |
| Protocols Supported | Modbus TCP, SRTP, EGD, OPC UA, PROFINET, DeviceNet, PROFIBUS |
| Serial Interfaces | None |
| Auxiliary Storage Link | 1x USB 2.0 Master port |
| Companion Energy Pack | IC695ACC402 compatibility |
Profinet / EtherNet/IP Deterministic Networks and Firmware Flash Compatibility
The processor architecture utilizes dedicated microprocessor cores to isolate logic execution loops from the embedded switch networking layer. This optimizes synchronization across Profinet / EtherNet/IP deterministic networks, maintaining structural stability for media and controller redundancy configurations up to 8 racks. Network performance remains predictable during broad I/O density scaling due to independent handling of up to 48 concurrent SRTP connections. System configuration blocks maintain strict firmware flash compatibility parameters across the universal backplane, permitting online software downloads and runtime diagnostics without impacting active runtime communication schedules.
Frequently Asked Questions
Q: Does this module draw power from the 5 VDC or 3.3 VDC backplane pins?
A: No. The internal logic circuits of the IC695CPE330 consume 0.0 A at 5 VDC and 3.3 VDC. The total module power requirement is derived exclusively from the 24 VDC backplane rail, drawing a fixed 0.625 A current load.
Q: How are the three integrated RJ-45 interfaces partitioned on the network level?
A: The interfaces are divided into two distinct logical networks. LAN 1 operates via a single isolated RJ-45 port for direct network segregation. LAN 2 contains two physical RJ-45 ports tied to an embedded switch, facilitating local daisy-chain topologies.
Field Installation Guidelines
- Disconnect all primary power to the universal backplane prior to mounting or unmounting the CPU module to safeguard the internal backplane bus interface pins.
- Seat the module firmly into its 2-slot designation within the RX3i local rack frame, checking that the top and bottom structural latches are fully engaged.
- If using an external backup mechanism, connect the optional IC695ACC402 energy pack module directly to the dedicated port array located on the bottom faceplate of the CPU housing.
- Separate the 10/100/1000 Mbps Ethernet communication cables from physical motor drives and high-power AC relay trunks to prevent high-frequency electromagnetic noise induction.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading