The GE Fanuc IC697CPU782, also cataloged as the IC697CPU782 Central Processor Unit, operates as a dedicated hardware component for logic computation and high-speed floating-point processing within Series 90-70 platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC697CPU782 |
| Brand | GE Fanuc |
| Origin | USA / As specified on label |
| Weight | 2.01 lbs (0.91 kg) |
| Dimensions | Standard single-slot Series 90-70 module width |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Standard Series 90-70 backplane power draw |
| Processor Clock Speed | 16 MHz microprocessor |
| Floating-Point Unit | Supported (hardware math execution) |
| Max I/O Capacity | 12,000 (12K) I/O points |
| Slot Requirements | Single slot |
| Communication Interfaces | Onboard serial port |
Firmware Flash Compatibility and I/O Density Scaling
The IC697CPU782 incorporates a 16 MHz microprocessor paired with an integrated floating-point coprocessor to perform complex mathematical calculations and high-speed scan executions. The module architecture scales up to 12,000 I/O points across the local and expansion backplanes while preserving deterministic bus timing. Firmware flash compatibility ensures unified protocol execution across the onboard serial port, allowing data exchange with peripheral operator interfaces and programming devices without degrading CPU execution cycles.
Frequently Asked Questions
Q: What is the maximum total I/O capacity supported by the IC697CPU782 central processor unit?
A: The IC697CPU782 supports scaling up to 12,000 (12K) discrete and analog I/O points within the Series 90-70 control architecture.
Q: How many rack slots does the IC697CPU782 module occupy on the backplane?
A: The IC697CPU782 is designed as a single-slot module that mounts directly into the primary rack of a Series 90-70 system.
Field Installation Guidelines
- Ensure system power to the rack is completely isolated before inserting or removing the single-slot CPU module from the baseplate.
- Align the module card edges with the backplane guides and press firmly until the module is fully seated, then secure the top and bottom retaining screws to ensure proper frame ground connection.
- Connect serial communication cables to the onboard serial port using shielded twisted-pair wiring to minimize electromagnetic noise interference.
- Maintain clear vertical airflow paths above and below the module rack to ensure passive thermal dissipation within standard cabinet operating limits.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading