The GE Fanuc IC697PWR724, also cataloged as the IC697PWR724 Power Supply Module, operates as a dedicated hardware component for stable DC voltage distribution and system backplane powering within Series 90-70 VME rack systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC697PWR724 |
| Brand | GE Fanuc Emerson |
| Product Line | Series 90-70 |
| Origin | USA |
| Weight | 2.50 lbs (1.13 kg) |
| Dimensions | Standard Series 90-70 single-slot module width |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 160 Watts |
| Nominal Rated Voltage | 24 VDC |
| Input Voltage Range | 18 to 32 VDC |
| Input Inrush Energy | 22 J maximum |
| Output Power | 90 Watts maximum |
| Output Voltage | +5 VDC, +12 VDC, and -12 VDC |
| Overvoltage Limit | 5 VDC output overvoltage protection limit |
| Ride-Through Time | 10 ms |
| Backplane Compatibility | VME Compatible |
Backplane Bus Communication Velocity & Power Distribution
The IC697PWR724 module features dedicated internal power conversion circuitry tailored for high-density Series 90-70 backplane configurations. It delivers regulated +5 VDC logic power alongside auxiliary +12 VDC and -12 VDC rails to feed input/output circuits and processing cards across the backplane bus. System firmware flash compatibility and deterministic backplane communication velocity across the VME architecture rely on low-ripple output voltages during transient load demands. The internal power stage incorporates a controlled input inrush energy circuit rated up to 22 J to mitigate voltage sag on the primary 24 VDC feeder bus during initial system energization.
Frequently Asked Questions
Q: Can the IC697PWR724 module supply power to expansion racks in a Series 90-70 system?
A: Yes, the IC697PWR724 can provide power to a second rack in single or expansion configurations, provided the combined power drain across all connected rails does not exceed the maximum output limit of 90 Watts.
Q: What is the behavior of the supply during short primary power interruptions?
A: The module maintains a minimum ride-through time of 10 ms under full load conditions, permitting execution of hold-up functions before system power failure logic triggers.
Q: Is hot-swapping permitted for the IC697PWR724 module during backplane operation?
A: No, primary 24 VDC input power must be isolated and the backplane de-energized prior to inserting or removing the power supply module to prevent electrical arcing and backplane bus signal corruption.
Field Installation Guidelines
- Verify that incoming DC power wires are de-energized and tagged out prior to terminal connection. Ensure the supply line voltage remains strictly within the specified 18 to 32 VDC window.
- Align the module card edges with the designated rack slot guides of the Series 90-70 chassis. Slide the module firmly into place until the backplane connectors seat completely.
- Tighten the top and bottom retaining screws to secure the chassis ground bond and prevent physical displacement due to vibration.
- Wire primary 24 VDC input power using appropriate wire gauges, ensuring strict adherence to polarity and shield grounding standards to eliminate ground loops.
- Provide a minimum clearance of 50 mm above and below the rack chassis to ensure adequate convection airflow across thermal dissipation surfaces.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading