Configured for high-density backplane bus communication and module mounting in Rx7i System networks, the GE Fanuc IC698CHS009 (IC698CHS009 Rx7i PACsystem I/O Rack) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC698CHS009 |
| Brand | GE Fanuc |
| Origin | USA / As specified on label |
| Weight | Shipping weight: 4.0 kg |
| Dimensions | Standard Rx7i frame footprint |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Operating voltage: 5 to 12 VDC |
| Power Supply Rating | 100 W or 350 W power supply support |
| Current Rating | 20 A (with 100 W power) / 60 A (with 350 W power) |
| System Application | Rx7i System |
| Mounting Type | Rear mounting |
Backplane Bus Communication Velocity and Firmware Flash Compatibility
The IC698CHS009 rack provides low-resistance signal trace routing across the backplane structure to optimize backplane bus communication velocity among installed processing, communication, and I/O modules. Operating with internal voltage rails of 5 to 12 VDC, the assembly distributes up to 60 A backplane current when paired with a 350 W power supply unit (or 20 A with a 100 W power supply unit). This solid backplane power bus ensures signal integrity during firmware flash compatibility procedures across system controller components.
Frequently Asked Questions
Q: What current ratings apply to the IC698CHS009 backplane bus depending on the installed power supply unit?
A: The backplane bus supports a current rating of 20 A when utilizing a 100 W power supply unit, or up to 60 A when paired with a 350 W power supply unit.
Q: What are the primary operating voltage specifications for the IC698CHS009 backplane logic power distribution?
A: The internal backplane operates within a 5 to 12 VDC voltage range supplied directly by the chassis power supply module.
Field Installation Guidelines
- Mount the chassis securely against a rigid panel using rear mounting holes to verify mechanical grounding integrity across the frame.
- Verify total module current demands across the 5 VDC and 12 VDC backplane rails do not exceed the rating of the selected power supply unit before energizing system power.
- Maintain clean wire routing paths to prevent field conductor interference along the front module insertion tracks.
- Route ground bonding straps from the frame earth ground terminal directly to the enclosure main ground bus bar.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading