GE fanuc IS220PRTDH1B Mark VIe 10-Channel RTD Module

Availability: 99 left in stock

GE IS220PRTDH1B Mark VIe RTD Input Module The GE IS220PRTDH1B, also cataloged as the IS220PRTDH1B RTD Input Module, operates as...

SKU: IS220PRTDH1B

Manufacturer: GE Fanuc
Product No.: IS220PRTDH1B
Product Type: Analog Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 900g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

GE IS220PRTDH1B Mark VIe RTD Input Module

The GE IS220PRTDH1B, also cataloged as the IS220PRTDH1B RTD Input Module, operates as a dedicated hardware component for multi-channel resistance thermal measurement processing within GE Mark VIe platforms. The unit digitizes field resistance signals across 10 independent channels directly to the dual IONet Ethernet backbone, interfacing Platinum, Copper, and Nickel sensors to the central controller.

Hardware Specifications

Parameter	Specification
Model	IS220PRTDH1B
Brand	GE
Origin	USA
Weight	0.9 kg
Dimensions	225 mm x 167 mm x 55 mm
Operating Temp	-30 to 65 deg C
Power Consumption	12 W typical (18 to 32 VDC range, 28 VDC nominal)
Channel Count	10 independent RTD channels
Supported RTDs	Pt 100 ohm, Pt 200 ohm, Pt 500 ohm, Pt 1000 ohm; Cu 10 ohm; Ni 120 ohm
A/D Resolution	16-bit
Measurement Accuracy	+/-0.1% of full scale
Scan Rate	10 ms per channel
Galvanic Isolation	1500 VDC (field inputs to system logic)
Noise Rejection	>120 dB @ 50/60 Hz common mode; >60 dB normal mode
Communication	Dual Ethernet connectivity to Mark VIe IONet

Backplane Bus Communication Velocity & CJC Integration

The IS220PRTDH1B executes high-resolution 16-bit A/D conversion at a 10 ms scan rate per channel, maintaining rapid backplane bus communication velocity across the dual 100 Mbps IONet infrastructure. Firmware flash compatibility ensures synchronized parameter scaling and automatic line resistance compensation across Platinum, Nickel, and Copper sensor profiles. Embedded 1500 VDC galvanic isolation combined with >120 dB common-mode noise suppression prevents signal degradation and ground potential shifts from compromising system control loops.

Frequently Asked Questions

Q: Can the IS220PRTDH1B module be replaced while the system rack is powered?

A: Yes, the I/O pack supports live insertion and removal (hot-swapping) on the matching terminal board without disrupting adjacent system hardware or network communications.

Q: What mechanisms prevent line-resistance variations from affecting measurement accuracy?

A: The onboard measurement circuit utilizes internal lead-wire compensation processing across 3-wire and 4-wire RTD field configurations to neutralize wiring distance resistance errors.

Q: How does the pack communicate thermal data to the Mark VIe controllers?

A: The unit processes analog sensor signals locally and transmits digital engineering values across redundant 100 Mbps IONet Ethernet connections.

Field Installation Guidelines

Mount the IS220PRTDH1B I/O pack directly onto the designated Mark VIe terminal board, securing the physical retention screws to ensure reliable ground contact. Route all RTD field wiring through shielded twisted-pair cables, maintaining strict separation from high-voltage power conduits to limit electromagnetic interference. Connect all cable shields to the terminal board grounding bus. Verify that both primary and secondary IONet Ethernet cables seat fully into their respective RJ45 ports before applying 28 VDC input power.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.