Configured for high-density multi-channel analog signal acquisition in PACSystems RX3i universal backplane architectures, the GE IC695ALG600 (IC695ALG600 Universal Analog Input Module) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695ALG600 |
| Brand | GE Fanuc / Emerson Automation |
| Origin | USA |
| Weight | 0.34 kg (0.75 lbs) |
| Dimensions | Single-slot PACSystems RX3i module format |
| Operating Temp | 0 to 60 deg C (32 to 140 deg F) |
| Storage Temp | -40 to 85 deg C (-40 to 185 deg F) |
| Humidity | 5 to 95%, non-condensing |
| Power Consumption | 5.4 W maximum (3.3 VDC @ 350 mA, 5 VDC @ 400 mA) |
| Channel Configuration | 8 channels organized into 2 isolated groups (4 channels per group) |
| Module Conversion Method | Sigma-delta |
| Module Resolution | 11 to 16 Bits |
| Current Inputs | 0-20 mA, 4-20 mA, +/-20 mA |
| Voltage Inputs | +/-50 mV, +/-150 mV, 0-5 VDC, 1-5 VDC, 0-10 VDC, +/-5 VDC, +/-10 VDC |
| Resistance Inputs | 0 to 250 / 500 / 1000 / 2000 / 3000 / 4000 Ohms |
| RTD Inputs | PT 385 / 3916, N 618 / 672, NiFe 518, CU 426 |
| Thermocouple Inputs | B, C, E, J, K, N, R, S, T (with 2 Cold Junction Compensation channels) |
| Configurable Input Filters | 8 Hz, 12 Hz, 16 Hz, 40 Hz, 200 Hz, 1000 Hz |
| System Firmware / Software | Requires RX3i Firmware v2.80+; Configured via PME v5.0 SP1A LD-PLC Hotfix 1+ |
| Terminal Blocks Supported | IC694TBB032, IC694TBB132, IC694TBS032, IC694TBS132 |
| Status LED Indicators | Module Status (OK), Field Status, Terminal Block LED |
Backplane Bus Communication Velocity & I/O Scaling
The module maintains optimized backplane bus communication velocity across the PACSystems RX3i rack platform, ensuring deterministic signal updates during active scanning. Channel-to-channel group isolation and high I/O density scaling allow continuous operation during firmware flash updates and online configuration changes without signal interruption.
Frequently Asked Questions
Q: What backplane power rails does the IC695ALG600 draw from, and what is the total power dissipation? A: The module draws 350 mA from the internal 3.3 VDC bus and 400 mA from the internal 5 VDC bus, resulting in a maximum power dissipation of 5.4 W.
Q: Which terminal blocks are recommended when wiring shielded cables or thick insulation conductors to the module? A: Extended terminal blocks (Box-style IC694TBB132 or Spring-style IC694TBS132) are recommended because their enlarged outer cover accommodates thicker wire insulation and shield drain conductors.
Field Installation Guidelines
- Backplane Mounting: Firmly seat the IC695ALG600 into any universal slot of the PACSystems RX3i universal backplane until the rear backplane connectors fully engage and top/bottom latching levers lock securely.
- Terminal Block Wiring: Land field wiring on compatible terminal blocks (IC694TBB032, IC694TBB132, IC694TBS032, or IC694TBS132). Maintain strict physical separation between high-voltage power cabling and low-level analog signal leads.
- Shielding & Grounding: Connect cable shield wires to the terminal block drain terminals or a low-impedance DIN-rail ground bar to prevent noise pickup on low-level mV, RTD, and thermocouple signal loops.
- Cold Junction Compensation: When using thermocouple sensors, install CJC sensors on designated terminal block locations to ensure accurate temperature compensation.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Bently Nevada 330877-080-37-00 3300 XL 50 mm Extension Cable
$99.00
$199.00
Bently Nevada 330854-080-24-CN 3300 XL 25 mm Extension Cable
$99.00
$199.00
330854-040-24-CN Bently Nevada 3300 XL 25 mm Extension Cable
$99.00
$199.00
Bently Nevada 330854-040-24-05 3300 XL 25 mm Extension Cable
$99.00
$199.00
330854-040-24-00 Bently Nevada 3300 XL 25 mm Extension Cable
$99.00
$199.00
Guide
Translation missing: en.general.search.loading