GE IC697PWR710 Series 90-70 Power Supply Module

Availability: 10 left in stock

The GE IC697PWR710, also cataloged as the IC697PWR710 Power Supply Module, operates as a dedicated hardware component for backplane power...

SKU: IC697PWR710

Manufacturer: GE Fanuc
Product No.: IC697PWR710
Product Type: Power Supply Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 1360g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The GE IC697PWR710, also cataloged as the IC697PWR710 Power Supply Module, operates as a dedicated hardware component for backplane power generation within Series 90-70 platforms.

Hardware Specifications

Parameter	Specification
Model	IC697PWR710
Brand	GE Fanuc Emerson
Origin	USA
Weight	3.00 lbs (1.36 kg)
Dimensions	Standard Series 90-70 single-slot plug-in profile
Operating Temp	0 to 60 deg C (Standard industrial range)
Power Consumption	90 W maximum input power at full load
Input Voltage Options	90-264 VAC (47-63 Hz) or 100-150 VDC
Input Inrush Current	3 A peak typical (half-cycle duration)
Power Factor Correction	> 0.95 via integrated active PFC circuitry
Maximum Output Power	56 W maximum total output
Nominal DC Output	5.1 VDC (Up to 11 A available on the +5 VDC rail)
Output Voltage Range	4.90 to 5.25 VDC
Overvoltage Limit	6.2 V typical (electronic clamping protection)
Overcurrent Limit	12 A typical (electronic foldback current limit)
Ride-Through Duration	21 ms minimum (at complete loss of nominal AC input)
VME Architecture	Compatible with VME standard C.1 specifications
Mounting Assignment	Leftmost slot of standard IC697 or VME racks

Backplane Bus Communication Velocity and Firmware Compatibility

The module supplies regulated 5.1 VDC power lines across the chassis backplane bus, sustaining the voltage stability needed to maintain high-speed backplane bus communication velocity during intensive CPU sweep intervals. Active power factor correction circuits minimize harmonic distortion across the input lines. Internal logic monitors the power rails, signaling early status alerts to the host controller prior to the expiration of the 21 ms ride-through window, enabling safe processor state preservation and firmware flash compatibility interlocks.

Frequently Asked Questions

Q: How does the overvoltage and overcurrent protection behave during a field fault?

A: The module utilizes non-destructive electronic clamping circuits. If the 5.1 VDC rail climbs to 6.2 V, the overvoltage loop clamps the output. Under overcurrent states approaching 12 A, the output voltage drops automatically. Both mechanisms protect the internal power supply fuse from opening, recovering to nominal values immediately after the field load anomaly is removed.

Q: Can this power supply module drive multiple racks simultaneously?

A: Yes. It can drive a secondary expansion rack through specialized extension cables (IC697CBL700 / IC697CBL713) provided that the auxiliary chassis requires only 5 VDC logic power and the combined current demands of both racks remain within the 56 W maximum output thresholds.

Field Installation Guidelines

Mechanical Placement: Slide the module into the leftmost slot of an authorized IC697 rack frame or a VME integrator rack. Ensure that the module's backplane connector aligns perfectly before locking it into position.
Grounding Configuration: Connect a dedicated AWG #12 (3.3 mm2) copper grounding conductor to the module's front ground screw terminal. Tighten the wire lug screw to a maximum torque rating of 12 in-lb (1.3 N-m).
Wiring Requirements: Use only copper supply conductors rated for a minimum temperature of 75 deg C. Route the incoming high-voltage AC or DC lines inside separate conduits away from sensitive low-level analog or communication cables.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.