IC698CRE030 GE Central Processing Unit

GE IC698CRE030 Rx7i PACsystems Central Processing Unit

GE IC698CRE030 Rx7i PACsystems Central Processing Unit

Availability: 10 left in stock

The GE IC698CRE030, also cataloged as the IC698CRE030 Central Processing Unit, serves as the primary IC698CRE030 Central Processing Unit utilized...

SKU: IC698CRE030

Manufacturer: GE Fanuc
Product No.: IC698CRE030
Product Type: Central Processing Units
Product Origin: USA
Payment:T/T, Western Union
Weight: 1330g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The GE IC698CRE030, also cataloged as the IC698CRE030 Central Processing Unit, serves as the primary IC698CRE030 Central Processing Unit utilized to execute boolean logic and network routing across Rx7i PACsystems platforms. The module operates at 600 MHz and executes hardware-level control cycles over dual integrated serial lines and a self-negotiating Ethernet interface.

Hardware Specifications

Parameter	Specification
Model	IC698CRE030
Brand	GE Fanuc Emerson
Origin	USA
Weight	1.33 kg (2.94 lbs)
Dimensions	Standard Rx7i slot width
Operating Temp	0 to 50 deg C
Power Consumption	16.0 W (3.2 A @ 5 VDC)
Processor Speed	600 MHz
User Memory	64 MB
Discrete I/O Capacity	32 Kbits
Boolean Execution Speed	0.069 ms
Communication Interfaces	1x RJ45 Ethernet (10/100 Mbps), 1x RS-232, 1x RS-485
Protocol Support	Modbus RTU Slave, SNP, Serial I/O
Redundancy Architecture	Hot Standby Redundancy

Industrial Control and Network Determinism

The IC698CRE030 implements dedicated backplane bus communication velocity protocols to maintain deterministic I/O density scaling across the Rx7i rack layout. Embedded firmware flash compatibility enables simultaneous execution of high-speed Boolean calculation loops and Ethernet/IP or Profinet industrial network data prioritization. The underlying bus interface architecture ensures that critical application memory regions remain highly synchronized, minimizing internal transport jitter during high-density I/O scanning phases.

Frequently Asked Questions

Q: What are the restrictions regarding hot-swapping the IC698CRE030 CPU within the Rx7i backplane?

A: The IC698CRE030 must not be inserted or removed while the VME backplane power is active. Prior to module extraction or insertion, the rack power supply must be completely isolated to prevent catastrophic electrical damage to the logic circuitry and backplane connectors.

Q: How is the synchronization delay managed during a Hot Standby Redundancy failover event?

A: The hardware architecture relies on deterministic memory-mirroring processes across the redundant pair. The dedicated transfer channel handles the 64 MB memory profile synchronization, allowing bumpless switchover execution within standard control cycle parameters if the primary unit drops its heartbeat signals.

Field Installation Guidelines

Chassis Placement and Power Limits: Ensure the Rx7i chassis power supply is rated to support the 3.2 A current draw at 5 VDC required exclusively by this CPU module, alongside any additional I/O modules on the same local bus segment.
Shielding and Noise Suppression: All communication lines, including the RS-232, RS-485, and RJ45 Ethernet links, must utilize high-quality shielded twisted-pair (STP) cabling. Ground the cable shields directly to the enclosure master ground bar to eliminate common-mode electromagnetic interference.
Thermal Management: Maintain free air convection clearance zones above and below the chassis assembly. Ensure ambient enclosure internal temperatures do not exceed the 50 deg C operational limit under continuous 100% processing load.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.