The GE IS200TRLYS1BGG, also cataloged as the IS200TRLY Discrete Relay Termination Board, operates as a dedicated hardware component for switching discrete control signals and executing relay contact outputs within GE Mark VI Speedtronic platforms. Equipped with plug-in magnetic relays using Form C contacts, this specific board revision includes onboard diagnostic circuitry configured for coil current evaluation.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200TRLYS1BGG (IS200TRLY) |
| Brand | GE (General Electric) |
| Origin | USA |
| Operating Temp | -30 to 65 deg C |
| Power Consumption | Circuit Dependent (Supports 120/240 VAC Power Sources) |
| Relay Type | Plug-in Magnetic Relays with Form C Contacts |
| Diagnostic Function | Coil Current Diagnostics (S1BGG Revision) |
| Field Interfaces | 2 Barrier-type Screw Terminal Strips (Numbered Terminals) |
| System Connectivity | 4 D-shell Connectors, 3 Three-pin Plugs |
| Passive Components | Fuses, Variable Resistors, Diodes, Capacitors, Integrated Circuits |
Deterministic Backplane Bus Velocity and I/O Density Scaling
The IS200TRLYS1BGG processes discrete relay switching operations while providing fast channel feedback to the controller pack via high-density D-shell cabling interfaces. Operating without latency on the backplane bus communication velocity loop, the board transmits real-time coil current diagnostic status to verify solenoid and interlock execution. Full firmware flash compatibility within the Mark VI I/O processor layer allows continuous line monitoring and dynamic state reporting across multi-channel I/O density scaling configurations.
Frequently Asked Questions
Q: What is the primary operational distinction between the IS200TRLYS1BGG and the TRLYH1C revision?
A: The IS200TRLYS1BGG revision is equipped with diagnostic circuitry for relay coil current monitoring, whereas the TRLYH1C revision is configured specifically for contact voltage diagnostics.
Q: How are field wiring connections landed on the IS200TRLYS1BGG?
A: Field control lines connect directly to the two numbered barrier-type screw terminal strips positioned along the outer edge of the board.
Q: Can individual relays be serviced or replaced on the board?
A: Yes, the board utilizes plug-in magnetic relays with Form C contacts, allowing individual relay units to be replaced without desoldering components from the printed circuit board.
Field Installation Guidelines
- Disconnect all primary power supplies and field contact power sources (including 120/240 VAC control loops) before servicing or installing the board.
- Wear an ESD grounding wrist strap attached to a bare metal cabinet grounding point during module handling.
- Secure the terminal board firmly to the cabinet mounting plate using all designated screws to ensure chassis earth continuity.
- Route high-voltage AC output relay lines away from low-voltage DC communication cables to prevent electromagnetic coupling.
- Verify that all multi-pin D-shell connectors are fully seated and secured with their mechanical retention screws prior to reapplying power.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
ABB NTAC-02 58967441 Pulse Encoder Interface Module
$99.00
$199.00
GE Fanuc IC610MDL116 Series One Analog Input Module
$99.00
$199.00
ABB 1SBL351001R8011 A50-30-11 DC Contactor
$99.00
$199.00
ABB NDCU-21 63985317B Drive Control Unit
$99.00
$199.00
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
ABB TB840A 3BSE037760R1 Modulebus Cluster Modem
$99.00
$199.00
ABB 1VCR017053G0006 VSC Power Supply and Control Board
$99.00
$199.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
ABB DSBC172 Advant Master Bus Repeater Module
$99.00
$199.00
ABB NPOW-41 Power Supply Board
$99.00
$199.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
ABB FPR3315101R1032 ICSI16D1 CS31 I/O Remote Unit 24 Vdc
$99.00
$199.00
ABB 3BHE021951R0124 KVC758 A124 Power Supply Module
$99.00
$199.00
GE Fanuc A02B-0091-C113 Macro Cassette B Memory Module
$99.00
$199.00
Guide
Translation missing: en.general.search.loading