The GE IS210AEAAH1BCA, also cataloged as the IS210AEAA Printed Circuit Board, operates as a dedicated hardware component for high-speed signal processing and I/O signal routing within GE Mark VIe control system platforms. The board conditions 24 V DC power inputs and drives 0-10 V DC analog voltage output signals up to a maximum current load of 2 A.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200AEAAH1BCA (IS210AEAA) |
| Brand | GE (General Electric) |
| Origin | USA |
| Weight | 1.10 kg |
| Dimensions | 812 x 516 x 825 mm |
| Operating Temp | Standard Industrial Grade (-30 to 65 deg C nominal) |
| Power Consumption | System Backplane Powered / 24 V DC Supply |
| Power Supply Input | 24 V DC |
| Input Voltage | 24 V DC |
| Output Voltage | 0-10 V DC |
| Maximum Current | 2 A |
| Coating | Conformal Coated PCB |
| System Compatibility | GE Mark VIe Control Systems |
Backplane Bus Communication Velocity and Firmware Compatibility
The IS210AEAAH1BCA interfaces directly with the Mark VIe control backplane, leveraging high-speed backplane bus communication velocity to ensure real-time telemetry processing across deterministic industrial networks. Firmware flash compatibility enables structured initialization, allowing synchronization between local I/O density scaling profiles and core control processors. Integrated conformal coating shields onboard traces against moisture, dust, and aggressive industrial airborne particulates, preventing trace bridging during continuous operational loading.
Frequently Asked Questions
Q: What protection measures does the conformal coating provide on the IS210AEAAH1BCA PCB?
A: The conformal coating establishes a physical dielectric barrier across surface-mounted components and conductive traces. This prevents short circuits caused by moisture accumulation, atmospheric dust, and chemical contaminants in high-humidity ambient environments.
Q: How is the power distribution handled on the IS210AEAAH1BCA card?
A: The board receives a 24 V DC primary input voltage and regulates internal distribution circuits to deliver a 0-10 V DC analog output range supporting continuous current draws up to 2 A.
Q: Are there specific handling precautions required prior to physical installation?
A: Yes, as a static-sensitive circuit assembly, field technicians must wear a grounded wrist strap attached to chassis earth ground and handle the board exclusively by its non-conductive edges during installation.
Field Installation Guidelines
- Isolate all cabinet power sources and verify that the Mark VIe enclosure is completely de-energized before mounting the board.
- Ensure ESD grounding straps are securely attached to a bare metal frame point prior to removing the PCB from its anti-static shielding bag.
- Slide the IS210AEAAH1BCA carefully into the rack card guides, applying even pressure along the front edge until edge connectors firmly seat into the backplane socket.
- Torque all retention fasteners to 0.8 Nm (7 in-lbs) to maintain mechanical rigidity against ambient low-frequency vibration.
- Connect input power and signal field wiring harnesses to designated terminal headers, ensuring shield wires are grounded at a single chassis ground bus bar.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
ABB NTAC-02 58967441 Pulse Encoder Interface Module
$99.00
$199.00
GE Fanuc IC610MDL116 Series One Analog Input Module
$99.00
$199.00
ABB 1SBL351001R8011 A50-30-11 DC Contactor
$99.00
$199.00
ABB NDCU-21 63985317B Drive Control Unit
$99.00
$199.00
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
ABB TB840A 3BSE037760R1 Modulebus Cluster Modem
$99.00
$199.00
ABB 1VCR017053G0006 VSC Power Supply and Control Board
$99.00
$199.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
ABB DSBC172 Advant Master Bus Repeater Module
$99.00
$199.00
ABB NPOW-41 Power Supply Board
$99.00
$199.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
ABB FPR3315101R1032 ICSI16D1 CS31 I/O Remote Unit 24 Vdc
$99.00
$199.00
ABB 3BHE021951R0124 KVC758 A124 Power Supply Module
$99.00
$199.00
GE Fanuc A02B-0091-C113 Macro Cassette B Memory Module
$99.00
$199.00
Guide
Translation missing: en.general.search.loading