Configured for high-density analog signal processing in Mark VIe control systems, the GE IS210AEDBH3ACC (IS210AEDBH3 Analog Input Module) provides direct physical/electrical execution of isolated voltage acquisition.
Suffix Breakdown & Model Matrix
The part number denotes specific structural and revision characteristics for the assembly:
- IS210: Standard internal printed circuit board assembly within the GE product platform.
- AEDB: Functional acronym for Analog Input Board circuitry.
- H3: Group 3 hardware platform layout specification.
- ACC: Production revision code indicating factory design enhancements and artwork updates.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS210AEDBH3ACC |
| Brand | GE (General Electric) |
| Origin | USA |
| Dimensions | 10 cm x 10 cm x 2 cm |
| Operating Temp | -40 to 85 deg C |
| Power Consumption | 24 VDC external supply input |
| System Series | Mark VIe |
| Channel Capacity | 16 isolated, differential analog input channels |
| Input Signal Range | +/-10 VDC |
| Environmental Protection | Factory-applied conformal coating |
| System Diagnostics | Onboard status and system fault monitoring |
Backplane Bus Communication Velocity & Deterministic Networks
The IS210AEDBH3ACC converts +/-10 VDC differential signals across 16 electrically isolated input channels into digitized data streams for controller evaluation. Operating within Profinet / EtherNet/IP deterministic networks, the module routes field sensor inputs directly to the system rack without compromising signal fidelity. Engineered to optimize backplane bus communication velocity, the board architecture facilitates continuous update cycles for all connected channels. Advanced internal diagnostics constantly evaluate channel circuit continuity, voltage levels, and internal operating parameters, outputting real-time status data directly to central processing units across the backplane.
Frequently Asked Questions
Q: What input signal ranges and channel isolation features are supported by the IS210AEDBH3ACC?
A: The module accepts +/-10 VDC signal inputs across 16 isolated, differential channels designed to minimize ground loop interference across field sensors.
Q: What are the primary power requirements for driving the module circuitry?
A: The board operates from a standard 24 VDC external power supply rail to drive onboard analog-to-digital converters and signal conditioning logic.
Q: Is live hot-swapping supported for the IS210AEDBH3ACC card during operation?
A: No. System power must be isolated prior to removing or inserting the card to avoid field wiring arcing and signal errors on the primary VME/Mark VIe communication bus.
Field Installation Guidelines
- Power Isolation: De-energize all 24 VDC power sources and system rack supplies before handling or installing the module.
- Grounding Precautions: Attach a grounded ESD wrist strap to an unpainted chassis earth point prior to unpacking or touching the circuit board.
- Physical Mounting: Align the 10 cm x 10 cm PCB with the card guide rails inside the assigned slot, gently sliding the assembly backward until backplane connectors align.
- Connector Fastening: Seat the board firmly into the backplane receiver, then tighten all retaining screws to lock the assembly into place and maintain ground continuity.
- Field Signal Wiring: Wire field transmitters to the corresponding +/-10 VDC differential input terminals. Ground signal cable shields at the designated cabinet grounding bar to mitigate high-frequency noise.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
ABB NTAC-02 58967441 Pulse Encoder Interface Module
$99.00
$199.00
GE Fanuc IC610MDL116 Series One Analog Input Module
$99.00
$199.00
ABB 1SBL351001R8011 A50-30-11 DC Contactor
$99.00
$199.00
ABB NDCU-21 63985317B Drive Control Unit
$99.00
$199.00
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
ABB TB840A 3BSE037760R1 Modulebus Cluster Modem
$99.00
$199.00
ABB 1VCR017053G0006 VSC Power Supply and Control Board
$99.00
$199.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
ABB DSBC172 Advant Master Bus Repeater Module
$99.00
$199.00
ABB NPOW-41 Power Supply Board
$99.00
$199.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
ABB FPR3315101R1032 ICSI16D1 CS31 I/O Remote Unit 24 Vdc
$99.00
$199.00
ABB 3BHE021951R0124 KVC758 A124 Power Supply Module
$99.00
$199.00
GE Fanuc A02B-0091-C113 Macro Cassette B Memory Module
$99.00
$199.00
Guide
Translation missing: en.general.search.loading