Configured for high-speed network packet processing in Mark VIe platform control networks, the GE IS210MACCH2AGG (IS210MACC Network Interface Card) provides direct physical/electrical execution. The module manages deterministic packet flow over 10 Gigabit Ethernet interfaces using PCI Express 3.0 x16 host interconnectivity. Onboard protocol processing handles real-time data streaming over TCP/IP, UDP, and IPsec networks while maintaining strict hardware isolation from standard PCI host transactions.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS210MACCH2AGG |
| Brand | General Electric |
| Origin | USA |
| Weight | 0.4 kg (0.88 lbs) |
| Dimensions | 15.2 cm x 10.2 cm x 2.5 cm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 425 mA @ 5 VDC |
| Series | Mark VIe |
| Product Type | Network Interface Cards |
| Form Factor | PCI Express (PCIe) 3.0 x16 |
| Network Interface | 10 Gigabit Ethernet (10GbE) |
| Network Protocols | TCP/IP, UDP, IPsec |
| Data Transfer Rate | Up to 10 Gbps |
| Storage Temp | -40 to 85 deg C |
Backplane Bus Communication and Deterministic Networks
The IS210MACCH2AGG integrates directly into the Mark VIe control infrastructure, leveraging PCI Express 3.0 x16 bus velocity to ensure high-throughput communication across deterministic control loops. By managing 10 Gbps network data transfers via onboard hardware offload engines, the card minimizes backplane communication latencies while optimizing firmware flash compatibility across varying controller revisions. This deterministic network interface allows high-density I/O packet scaling without inducing CPU scan-time degradation during intense system events.
Frequently Asked Questions
Q: What host bus slot interface is required to install the IS210MACCH2AGG card?
A: The card requires a standard physical PCI Express (PCIe) 3.0 x16 slot capable of supplying 5 VDC auxiliary power to the board edge connectors.
Q: How does the module handle high-throughput control communication without introducing network delay?
A: The board utilizes native 10 Gigabit Ethernet MAC/PHY hardware engines supporting hardware-accelerated TCP/IP, UDP, and IPsec packet framing directly at full 10 Gbps wire speeds.
Q: Can the card operate in extreme cold industrial field environments below freezing?
A: No, the operating temperature specification for this module is rated strictly from 0 to 60 deg C (32 to 140 deg F).
Field Installation Guidelines
- ESD Protection Protocols: Wear an ESD wrist strap connected to cabinet chassis ground before opening static-shielded packaging or inserting the PCIe card into the backplane slot.
- PCIe Slot Seat and Lock Validation: Insert the card vertically into an unpowered PCIe 3.0 x16 slot until the edge connector snaps fully into the retention latch, and secure the bracket screw.
- Network Cable Radius & Strain Relief: Ensure 10GbE optical or copper cabling maintains a minimum bend radius of at least 10 times the cable diameter to prevent high-speed signal attenuation.
- Thermal Management: Maintain clear vertical airflow through the card retention slots to prevent thermal throttling within the 0 to 60 deg C operational envelope.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
ABB NTAC-02 58967441 Pulse Encoder Interface Module
$99.00
$199.00
GE Fanuc IC610MDL116 Series One Analog Input Module
$99.00
$199.00
ABB 1SBL351001R8011 A50-30-11 DC Contactor
$99.00
$199.00
ABB NDCU-21 63985317B Drive Control Unit
$99.00
$199.00
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
ABB TB840A 3BSE037760R1 Modulebus Cluster Modem
$99.00
$199.00
ABB 1VCR017053G0006 VSC Power Supply and Control Board
$99.00
$199.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
ABB DSBC172 Advant Master Bus Repeater Module
$99.00
$199.00
ABB NPOW-41 Power Supply Board
$99.00
$199.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
ABB FPR3315101R1032 ICSI16D1 CS31 I/O Remote Unit 24 Vdc
$99.00
$199.00
ABB 3BHE021951R0124 KVC758 A124 Power Supply Module
$99.00
$199.00
GE Fanuc A02B-0091-C113 Macro Cassette B Memory Module
$99.00
$199.00
Guide
Translation missing: en.general.search.loading