100% Genuine. 100,000+ Parts in Stock. Ready to Ship.

  • en

The GE Fanuc IC200ACC200, also cataloged as the IC200ACC200 Power Supply Accessory, operates as a dedicated hardware component for slot protection and mechanical enclosure continuity within VersaMax I/O carrier platforms.

Hardware Specifications

Parameter Specification
Model IC200ACC200
Brand GE Fanuc
Origin USA
Weight 1.00 lbs
Dimensions Standard VersaMax Power Supply Slot Dimensions
Operating Temp -40 to 85 deg C
Power Consumption Passive (0 W internal consumption)
Component Type Blank Cover Enclosure
Internal Electronics None (Mechanical Housing Only)
System Compatibility VersaMax Modular I/O Carriers

Backplane Bus Protection & Firmware Flash Compatibility

The IC200ACC200 blank housing maintains physical backplane protection across empty expansion positions on VersaMax modular carrier bases. By securing unpopulated power supply slots, the enclosure prevents airborne particulate accumulation and mechanical pin damage on backplane bus connectors. The passive structural design ensures uniform internal airflow dissipation across adjacent operational modules while preserving backplane bus communication velocity across active racks. Active system controllers maintain normal firmware flash compatibility and I/O density scaling routines without physical interruption or bus termination errors.

Frequently Asked Questions

Q: Does the IC200ACC200 contain any internal circuit boards or pass-through electrical connections?

A: No. The IC200ACC200 is a purely mechanical blank housing with no internal electronics, trace routing, or electrical components.

Q: Can the IC200ACC200 blank housing be installed or removed while the system rack is energized?

A: Yes. Because the unit contains no active or passive electrical circuitry, it can be physically inserted or removed without disrupting energized backplane power rails.

Field Installation Guidelines

  1. Inspect the target VersaMax power supply slot to verify backplane connector pins are free from debris and physical obstruction.
  2. Align the top and bottom guide rails of the IC200ACC200 housing with the mounting channels on the VersaMax baseplate.
  3. Push the blank housing firmly into the slot until the mechanical locking latch engages with an audible click.
  4. Verify flush physical alignment with adjacent operational modules to maintain cabinet ingress protection.
  5. To remove, depress the upper release tab and pull the module straight outward from the baseplate.

What's clients say about us

Translation missing: en.general.search.loading