IC200ACC403 Battery for 23 and 28 Point VersaMax Micro

Availability: 10 left in stock

Product Overview The IC200ACC403 provides essential memory backup for GE VersaMax Micro PLC systems, specifically targeting the 23-point and 28-point controllers. This...

SKU: IC200ACC403

Manufacturer: GE Fanuc
Product No.: IC200ACC403
Product Type: Lithium Battery Assemblies
Product Origin: USA
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Product Overview

The IC200ACC403 provides essential memory backup for GE VersaMax Micro PLC systems, specifically targeting the 23-point and 28-point controllers. This 3.0V Lithium coil cell assembly features pre-installed wire leads and a specialized connector to ensure a secure interface with the PLC’s internal battery holder. It maintains critical RAM data and real-time clock (RTC) settings during power interruptions. We supply this unit as 100% Brand New and Original, ensuring your automation logic remains intact during scheduled maintenance or unexpected power loss.

Technical Specifications

Feature	Details
Manufacturer	GE Fanuc (Emerson Automation)
Product Line	VersaMax Micro
Chemistry	Lithium (Non-Rechargeable)
Nominal Voltage	3.0 VDC
Capacity	210 mAh
Connection Type	Coil Cell with Wire Leads and Connector
Shelf Life	Up to 5 years at 30°C
Service Life	4 months minimum backup at 55°C (Power Off)
Reporting	Monitored via Status Bits %SA011 and %SA014
Compatibility	VersaMax Micro 23 and 28 Point Controllers

Engineering Advantages

Guaranteed Data Integrity: The IC200ACC403 preserves the user program, register data, and internal state variables. This eliminates the need for manual program reloads and minimizes downtime following a facility power cycle.
Intelligent Status Monitoring: The VersaMax CPU actively monitors the battery health. It reports low-voltage conditions directly to the PLC fault table and triggers internal status bits (%SA011/%SA014). This allow engineers to program HMI alarms for proactive battery replacement before data loss occurs.
Optimized for High-Temperature Environments: Unlike standard consumer batteries, this industrial-grade lithium cell maintains a reliable discharge curve even in hot control cabinets. It provides a minimum of 4 months of continuous backup at 55°C, ensuring protection during long-term machine storage.
Plug-and-Play Maintenance: The integrated wire leads and connector allow for rapid replacement without specialized soldering tools. The design ensures the correct polarity, preventing potential circuit damage during field installation.
Long-Term Storage Stability: With a shelf life of up to 5 years, the IC200ACC403 serves as an ideal spare part to keep in inventory. The low self-discharge rate guarantees that the battery remains ready for deployment whenever the system requires a fresh cell.

FAQs

Can I use a standard CR2032 from a retail store instead of the IC200ACC403?

While the cell itself is a 3V lithium type, the IC200ACC403 includes the specific wire leads and connector required by the VersaMax Micro housing. Standard batteries lack these leads and will not interface with the PLC's internal circuitry.
How often should I replace the IC200ACC403?

GE Fanuc recommends monitoring the CPU status bits. However, as a best practice, most maintenance teams replace the battery every 2 to 3 years to ensure the 4-month backup window remains valid, especially in environments with frequent power-down cycles.
Does the PLC lose its program immediately when I unplug the old battery?

The PLC typically uses an onboard capacitor to maintain memory for a very short duration (seconds to minutes) while you swap the battery. To prevent data loss, always perform the battery replacement while the PLC remains powered on, following all electrical safety protocols.
What happens if the battery fails and I don't replace it?

If the battery voltage drops below the threshold and the PLC loses main power, the volatile RAM will clear. This results in the loss of all user-defined variables and the application program unless it was previously saved to non-volatile flash memory.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.