Product Overview
The IC200ALG260 provides 8 single-ended input channels, grouped into a single interface for efficient field wiring. It accepts a wide range of unipolar and bipolar signals, including 0 to +10V, -10 to +10V, and 4 to 20 mA. By integrating high-speed 12-bit A/D conversion, the module ensures that the controller receives accurate representations of physical variables like pressure, temperature, and flow. This module mounts directly onto any VersaMax carrier, drawing its operating power from the backplane to simplify cabinet power distribution.
Technical Specifications
The IC200ALG260 hardware utilizes professional-grade optical isolation to shield the logic backplane from external electrical surges.
| Feature | Specification |
| Input Channels | 8 Single-ended |
| Input Ranges (Voltage) | 0 to +10V, -10V to +10V (Jumper Selectable) |
| Input Ranges (Current) | 4 to 20 mA |
| Resolution | 12-Bit (0 to 4095 counts) |
| Update Rate | 0.4 ms per module |
| Input Impedance | Voltage: 126 kΩ (max); Current: 200 Ω (max) |
| Isolation | 250 VAC continuous (Optical isolation) |
| Power Consumption | 130 mA @ 5V DC (Backplane) |
| Diagnostics | OK LED (Logic Power), INT PWR LED (Field Power) |
| Operating Temp | 0°C to +60°C (32°F to 140°F) |
Engineering Advantages
The IC200ALG260 streamlines complex automation tasks through its flexible and resilient design:
-
Universal Signal Compatibility: Field engineers often face mixed-signal environments. The IC200ALG260 allows for jumper-based selection between voltage and current modes, eliminating the need to stock multiple specialized modules for different sensor types.
-
High-Speed Logic Integration: With an update rate of 0.4 ms, this module provides near-instantaneous data refresh. This speed proves critical for high-performance loops where delayed sensor data could cause process instability or mechanical vibration.
-
Backplane Efficiency: The module draws a maximum of 130 mA from the 5V backplane. This low power footprint allows for higher I/O density in a single rack without exceeding the capacity of standard VersaMax power supplies.
-
Enhanced Fault Visibility: Dual LED indicators (OK and INT PWR) allow for rapid visual troubleshooting. Technicians can immediately determine if a failure stems from the PLC backplane or a loss of internal field-side power, significantly reducing mean time to repair (MTTR).
100% Brand New Original Hardware
We supply the GE Fanuc IC200ALG260 in 100% Brand New and Original factory packaging. We guarantee the authenticity of every unit, ensuring that the hardware meets all original OEM tolerances and performance benchmarks. Using new-in-box (NIB) components prevents the drift and calibration issues often associated with aged or used analog hardware, providing a stable long-term solution for your facility.
FAQs
-
Does the IC200ALG260 require an external power supply?
The module draws its logic power (130mA) directly from the VersaMax backplane. However, you must provide field power to the carrier to energize the analog circuitry and connected sensors.
-
How do I switch between voltage and current modes?
You configure the input type via physical jumpers on the module or through the PLC configuration software (such as Proficy Machine Edition). Always ensure the hardware jumpers match your software settings to prevent measurement errors.
-
What is the maximum update rate for the 8 channels?
The module refreshes its internal data every 0.4 ms. This provides a high-speed data stream that is suitable for most fast-acting industrial processes.
-
Can I use this module for differential inputs?
The IC200ALG260 is specifically designed for 8 single-ended inputs. If your application requires high noise immunity for low-level signals via differential wiring, we recommend checking modern high-resolution differential models in the VersaMax range.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading