Product Overview
The GE IC200ALG620-DC delivers high-precision temperature monitoring for industrial automation via the VersaMax I/O platform. This 4-channel module interfaces directly with Resistance Temperature Detectors (RTDs), converting thermal resistance into high-resolution 16-bit digital data. We supply this unit as 100% Brand New and Original, providing the critical accuracy required for HVAC control, food processing, and chemical thermal management.
Technical Specifications
| Parameter | Specification |
| Input Channels | 4 RTD Channels |
| Resolution | 16-bit |
| Input Type | RTD (Supports common types like Pt100, Ni120) |
| Backplane Current | 5 VDC (Approx. 130 mA) |
| Isolation | 250 VAC continuous (Optical isolation to logic) |
| Accuracy | ±0.25% of full scale |
| Update Rate | 1 ms per channel |
| Protection Rating | IP20 |
| Operating Temp | 0°C to 60°C |
| Dimensions | 110 mm x 66.8 mm x 50 mm |
Engineering Advantages
-
Precision Thermal Sensing: The 16-bit resolution provides superior granularity compared to standard 12-bit modules. This allows control systems to detect minute temperature shifts, improving product consistency in heat-sensitive manufacturing.
-
Integrated Noise Mitigation: Robust optical isolation (250 VAC) separates the field-side RTD signals from the sensitive PLC backplane. This prevents ground loops and EMI from corrupting data, even in environments with heavy motor interference.
-
Rapid Data Refresh: With an update rate of 1 ms per channel, the IC200ALG620-DC supports high-speed process loops. This responsiveness prevents thermal overshoot in fast-acting heating elements.
-
Simplified Troubleshooting: The module features dedicated OK and PWR LEDs. These indicators provide instant visual verification of both backplane power status and field-side power health, significantly reducing diagnostic downtime.
-
Global Compliance: Manufactured in the USA and carrying the 8538909100 tariff code, this module meets rigorous international quality standards for industrial electronic equipment.
FAQs
Q: Does the IC200ALG620-DC support 2-wire, 3-wire, or 4-wire RTDs?
A: This module primarily supports 3-wire RTD configurations to compensate for lead wire resistance. For 2-wire setups, you must jump the terminals at the carrier, though this may decrease accuracy over long distances.
Q: Can I mix different RTD types on the same module?
A: While the hardware supports various RTD profiles, you must configure the software parameters in your GE Fanuc / Emerson programming environment (such as Proficy Machine Edition) to match the sensor type connected to each channel.
Q: Is this module hot-swappable?
A: While VersaMax carriers allow for module removal, we recommend powering down the field-side power to prevent transients. Always ensure the "OK" LED is off before pulling the module from the carrier to maintain backplane integrity.
Q: How do I handle shield grounding for the RTD cables?
A: Connect the cable shields to the ground terminals on the VersaMax carrier. Ensure the DIN rail itself has a low-impedance connection to the main plant earth ground to maximize the module's built-in noise rejection capabilities.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading