Configured for discrete high-speed counting and signal processing in VersaMax PLC systems, the GE Fanuc IC200UDD020 (IC200UDD020 VersaMax Micro Controller) provides direct physical/electrical execution across 12 DC inputs and 8 DC source outputs.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200UDD020 |
| Brand | GE Fanuc Emerson |
| Origin | USA / Various |
| Weight | 0.33 kg (0.77 lbs) |
| Dimensions | Standard VersaMax Micro footprint |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 5 W power rating |
| Rated Supply Voltage | 24 VDC (19.2 to 30 VDC range) |
| Typical Input Current | 0.2 A at 24 VDC |
| Maximum Inrush Current | 1 A for 10 ms at 30 VDC |
| Hold-Up Time | 10 ms at 19.2 VDC |
| Total Channel Count | 20 I/O Points |
| Input Channel Type | 12 DC inputs (positive or negative logic) |
| Output Channel Type | 8 DC source outputs |
| High-Speed Counters | Configurable (4 Type A, 1 Type A + 1 Type B, 4 Type A_32, or 1 Type A_32 + 1 Type B_32) |
| Mounting Type | 35 mm DIN rail or panel mount |
Backplane Bus Communication Velocity & High-Speed Counter Execution
The IC200UDD020 executes real-time logic routines while maintaining rapid backplane bus communication velocity across expanded I/O tracks. Onboard high-speed counter channels process rapid pulse streams independently of the primary scan cycle, supporting multi-mode configurations including 32-bit Type A and Type B options. Firmware flash compatibility ensures unified register allocation and seamless system synchronization when interfacing with external expansion units across the VersaMax network architecture.
Frequently Asked Questions
Q: What are the input voltage tolerances and ride-through capabilities of the IC200UDD020 power circuit?
A: The controller accepts an operational supply range of 19.2 to 30 VDC with a typical current draw of 0.2 A at 24 VDC. It provides a power supply hold-up time of 10 ms at 19.2 VDC to withstand brief line drops.
Q: How are the high-speed counter channels configured on this model?
A: The controller supports flexible high-speed counting modes, including up to four 16-bit/32-bit Type A counters or combinations of Type A and Type B counter configurations for quadrature and directional pulse decoding.
Field Installation Guidelines
- DIN-Rail and Panel Mounting: Snap the unit onto a standard 35 mm DIN rail or secure it via panel mounting holes. Maintain a minimum vertical clearance of 50 mm above and below the module for natural thermal convection.
- DC Power and Field I/O Wiring: Wire the 24 VDC power source to the dedicated supply terminals, keeping inrush limits under 1 A. Route low-voltage DC logic input wiring separately from high-current DC sourcing output lines to minimize electromagnetic interference.
- System Grounding: Connect the chassis protective earth terminal directly to the enclosure ground bar using a heavy-gauge copper conductor to ensure transient noise immunity and stable counter operation.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
ABB NTAC-02 58967441 Pulse Encoder Interface Module
$99.00
$199.00
GE Fanuc IC610MDL116 Series One Analog Input Module
$99.00
$199.00
ABB 1SBL351001R8011 A50-30-11 DC Contactor
$99.00
$199.00
ABB NDCU-21 63985317B Drive Control Unit
$99.00
$199.00
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
ABB TB840A 3BSE037760R1 Modulebus Cluster Modem
$99.00
$199.00
ABB 1VCR017053G0006 VSC Power Supply and Control Board
$99.00
$199.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
ABB DSBC172 Advant Master Bus Repeater Module
$99.00
$199.00
ABB NPOW-41 Power Supply Board
$99.00
$199.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
ABB FPR3315101R1032 ICSI16D1 CS31 I/O Remote Unit 24 Vdc
$99.00
$199.00
ABB 3BHE021951R0124 KVC758 A124 Power Supply Module
$99.00
$199.00
GE Fanuc A02B-0091-C113 Macro Cassette B Memory Module
$99.00
$199.00
Guide
Translation missing: en.general.search.loading