The GE Fanuc IC693CBL328, also cataloged as the IC693CBL328 High Density I/O Cable, operates as a dedicated hardware component for field signal wiring and point-to-point electrical interconnection within Series 90-30 platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693CBL328 |
| Brand | GE Fanuc / Emerson |
| Origin | USA / As specified on label |
| Weight | 1.00 lbs (0.45 kg) |
| Dimensions | Cable length: 10 ft (3 m); Connector Depth Clearance: 2.0 in (51 mm) |
| Operating Temp | Standard industrial operating range |
| Power Consumption | Passive wiring interface (1.2 A current rating per conductor) |
| Cable Type | High density I/O wiring cable (Unshielded) |
| Conductor Gauge | 24 AWG (#24 AWG) solid color wire pairs with black tracer |
| PLC Side Connector | Right-angle 24-pin connector (Fujitsu FCN-365S024-AU compatible) |
| Field Side Interface | Flying leads (stripped/tinned wires) |
| Incompatible Modules | IC693 Axis Positioning Module |
| Compatible Modules | IC693MDL654, IC693MDL655, IC693MDL752, IC693MDL753, IC694 series high-density modules |
Backplane Bus Communication Velocity and I/O Density Scaling
The IC693CBL328 provides a direct physical signal interface between 32-point high-density discrete I/O modules and user-supplied field terminal blocks. Featuring a right-angle 24-pin Fujitsu connector, it optimizes depth clearance within control enclosures while supporting maximized I/O density scaling. The 3-meter assembly employs pre-wired 24 AWG solid conductors with black tracers, enabling pin-to-pin signal mapping without increasing local backplane communication latency or cycle time.
Frequently Asked Questions
Q: What physical connections are provided on each end of the IC693CBL328 cable?
A: One end is terminated with a right-angle 24-pin female Fujitsu FCN-365S024-AU compatible connector, while the opposite end consists of stripped, tinned flying leads for terminal wiring.
Q: Are there specific Series 90-30 modules that must not be connected using the IC693CBL328?
A: Yes. Although compatible with IC693 and IC694 high-density discrete I/O modules, the IC693CBL328 must not be connected to the IC693 Axis Positioning Module.
Field Installation Guidelines
- Seat the right-angle 24-pin connector firmly onto the 32-point module port until the connector latches engage, ensuring a minimum enclosure depth clearance of 2.0 inches (51 mm).
- Route the 10-foot unshielded cable assembly through panel wireways, maintaining separation from high-voltage AC conductors and drive wiring to avoid electromagnetic noise coupling.
- Match color-coded 24 AWG conductors and black tracer markings to field terminal point designations before securing individual wire leads.
- Ensure the cable assembly is installed away from direct sunlight and high ambient heat sources to preserve conductor insulation integrity.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading