IC695PBM300 GE PROFIBUS Master Module

IC695PBM300 GE PACSystems RX3i PROFIBUS Master Module

IC695PBM300 GE PACSystems RX3i PROFIBUS Master Module

Availability: 10 left in stock

The GE IC695PBM300, also cataloged as the IC695PBM300 PROFIBUS Master Module, operates as a dedicated hardware component for deterministic fieldbus...

SKU: IC695PBM300

Manufacturer: GE Fanuc
Product No.: IC695PBM300
Product Type: Communication Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 140g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The GE IC695PBM300, also cataloged as the IC695PBM300 PROFIBUS Master Module, operates as a dedicated hardware component for deterministic fieldbus communication execution within PACSystems RX3i PCI backplane architectures.

Hardware Specifications

Parameter	Specification
Model	IC695PBM300
Brand	GE Fanuc / Emerson Automation
Origin	USA
Weight	0.14 kg (0.31 lbs)
Dimensions	Single-slot PACSystems RX3i module format
Operating Temp	0 to 60 deg C
Storage Temp	-40 to 85 deg C
Power Consumption	1.45 W maximum (440 mA @ 3.3 VDC)
Backplane Interface	RX3i Universal Backplane (PCI connection)
Communication Interface	1 PROFIBUS Master Port
Communication Protocols	PROFIBUS DP, DP-V1 Read/Write/Alarm
Supported Slave Capacity	Up to 125 PROFIBUS DP slaves
Network Data Exchange Capacity	3584 Bytes maximum input data, 3584 Bytes maximum output data
Per-Slave Exchange Limit	244 Bytes input data, 244 Bytes output data
Supported Baud Rates	9.6 kBit/s, 19.2 kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500 kBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s, 12 MBit/s
Auxiliary Control Modes	Sync mode, Freeze mode
System Firmware Requirements	RX3i Controller Firmware v2.90 or later
Diagnostics & Status Data	Slave Status Bit Array Table, Network Diagnostic Counters, DP Master Diagnostic Counters, Slave Diagnostic Address
LED Indicators	PROFIBUS OK LED, Network LED, MOD Status LED

Backplane Bus Velocity & Deterministic Network Execution

The module manages high-speed fieldbus data transfers over Profinet / EtherNet/IP deterministic networks and PCI backplane bus interfaces. Operating across configurable baud rates up to 12 MBit/s, the hardware maintains backplane bus communication velocity while maintaining firmware flash compatibility via indirect updates using the host controller and WinLoader utility.

Frequently Asked Questions

Q: What are the backplane power supply requirements for the IC695PBM300?

A: The module draws 440 mA exclusively from the 3.3 VDC backplane power rail on the RX3i PCI universal backplane.

Q: How is firmware updated on the IC695PBM300 module?

A: Firmware flash upgrades are performed indirectly through the host RX3i controller utilizing the WinLoader software utility.

Q: What system software and CPU firmware versions are required to run the IC695PBM300?

A: The host RX3i controller must run firmware version 2.90 or higher to support communications with the module.

Field Installation Guidelines

Module Insertion: Mount the IC695PBM300 into a designated universal backplane slot of the PACSystems RX3i rack, ensuring the rear PCI edge connector aligns correctly before locking top and bottom retention clips.
Cable Termination: Connect standard RS-485 PROFIBUS cables using DB9 connectors. Ensure bus termination resistors are enabled on the physical end nodes of the segment.
Shield Grounding: Secure cable shielding directly to the cable connector metal shell and grounded DIN-rail chassis to eliminate common-mode signal interference.
Host Synchronization: Configure the module within Proficy Machine Edition and verify communication status via the front panel OK, Network, and MOD LEDs after backplane power-up.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.