IC695PNC001 GE Fanuc PROFINET Module

IC695PNC001 GE Fanuc PACSystems RX3i PROFINET Controller Module

IC695PNC001 GE Fanuc PACSystems RX3i PROFINET Controller Module

Availability: 10 left in stock

Configured for high-speed PROFINET LAN communications in PACSystems RX3i platforms, the GE Fanuc IC695PNC001 (IC695PNC001 PROFINET Controller) provides direct physical/electrical...

SKU: IC695PNC001

Manufacturer: GE Fanuc
Product No.: IC695PNC001
Product Type: PROFINET Controllers
Product Origin: USA
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Configured for high-speed PROFINET LAN communications in PACSystems RX3i platforms, the GE Fanuc IC695PNC001 (IC695PNC001 PROFINET Controller) provides direct physical/electrical execution. The module functions as an interface enabling compatible RX3i CPUs to transmit and receive industrial data over deterministic networks using standard topologies including ring, star, and daisy-chain configurations.

Hardware Specifications

Parameter	Specification
Model	IC695PNC001
Brand	GE Fanuc Emerson
Origin	United States
Weight	0.45 kg (1.00 lbs)
Dimensions	Standard single-slot width
Operating Temp	0 to 60 deg C
Power Consumption	1.5 A maximum @ 5 VDC, 0.5 A @ 3.3 VDC (without SFPs)
Network Protocol	PROFINET Version 2.2 General Class A
Port Connectors	2 x RJ-45, 2 x SFP Cages, 1 x Micro USB
Data Update Times	1 ms to 512 ms (Configurable steps)
I/O Device Capacity	64 per controller; 128 max per network
Backplane Support	Universal Backplane Only

Profinet Deterministic Networks & I/O Density Scaling

The IC695PNC001 implements high-throughput communication velocity across Profinet / EtherNet/IP deterministic networks, exchanging up to 128 Kbytes of combined input/output memory per controller. Scalability parameters permit the installation of up to four PROFINET controller modules within the main CPU rack, extending system capacity to support up to 128 total I/O devices per RX3i CPU. Module firmware updates are maintained through the WinLoader utility, preserving structural flash compatibility for system expansions.

Frequently Asked Questions

Q: Does the IC695PNC001 support hot-swapping or card replacement while under power?

A: Yes. The IC695PNC001 supports Removal and Insertion Under Power (RIUP) within universal backplanes, enabling module replacement without affecting the operational status of adjacent hardware.

Q: How does the power consumption vary when installing SFP optical connectors?

A: Base hardware draws 0.5 A at its rated voltage. Each active SFP device adds 0.35 A, raising the total power consumption to a maximum of 1.2 A when both SFP cages are populated. At maximum load under 5.5 VDC transients, the draw can peak at 1.5 A.

Q: What is the primary function of the front panel micro USB connector?

A: The micro USB interface is designed exclusively for diagnostic monitoring and initial system setup using a Command Line Interface (CLI) via telnet. It cannot be used for application runtime data exchange.

Field Installation Guidelines

Chassis Positioning: Secure the module exclusively within the main system rack containing the host CPU. Align the hardware with the card guides of a universal backplane and press firmly until the locking mechanisms seat.
Network Interconnections: Use shielded Twisted Pair (STP) Cat 5e or Cat 6 cables for RJ-45 connections to maintain network determinism. Ground the cable shields at the patch panel or enclosure entry points.
Manual Reset Execution: A dedicated restart pushbutton is located on the front panel to manually cycle the PROFINET controller logic without interrupting power to the main RX3i chassis.
CPU and Firmware Compatibility: Verify that the host CPU is an RX3i CPU315 or CPU320 operating on firmware version 7.0 or higher prior to system commissioning.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.