The GE Fanuc IC695PNS001, also cataloged as the IC695PNS001 PROFINET Scanner Module, operates as a dedicated hardware component for remote I/O data routing and network connection management within RX3i PacSystem platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695PNS001 |
| Brand | GE Fanuc Emerson |
| Origin | United States |
| Weight | 0.54 kg (1.19 lbs) |
| Dimensions | Single slot wide module |
| Operating Temp | 0 to 60 deg C |
| Storage Temp | -40 to 85 deg C |
| Power Consumption | 1.1 A at 5 VDC, 1.2 A at 3.3 VDC |
| Communication Ports | 4x Switched Ethernet ports (2x RJ-45, 2x SFP cages) |
| Serial Interface | 1x Micro USB port (firmware upgrades only) |
| Data Rates | 10/100/1000 Mbps auto-sensing |
| Network Topologies | Linear, Star, Daisy chain, Ring, Redundant Media |
| Local Parameters Storage | Integrated SD card slot for name/IP mapping transfer |
| Configuration Software | Proficy Machine Edition version 8.50 or later |
| Diagnostic Indicators | OK, LAN, STATUS, CONN, PORT, ACTIVE, USB LEDs |
Profinet / EtherNet/IP Deterministic Networks and I/O Density Scaling
The module executes high-speed packet scanning across distributed nodes to coordinate synchronized physical states with host processing units over Profinet / EtherNet/IP deterministic networks. During periods of expansive I/O density scaling across remote chassis layers, the hardware handles localized input/output state defaults during loss-of-signal scenarios without degrading backplane bus communication velocity. The dual SFP cages support direct fiber-optic integration to prevent ground loop noise propagation across long industrial distances, ensuring total firmware flash compatibility across mixed Series 90-30 and RX3i hardware networks.
Frequently Asked Questions
Q: How can network configurations be replicated across multiple IC693/IC695 chassis without programming software?
A: The module allows the I/O device name, IP address parameters, and operational configurations to be stored on an SD card. Inserting this card into another backup module transfers the configuration directly, bypassing the standard software interface.
Q: Are the SFP transceivers included within the base part number package?
A: No. The hardware contains 2 built-in RJ-45 ports and 2 empty SFP pluggable cages. The required single-mode or multi-mode SFP fiber transceivers must be specified and sourced separately based on physical cable media constraints.
Field Installation Guidelines
- Remove system power from the destination universal backplane slot prior to inserting or removing the scanner module.
- Mount the module vertically into the chassis guides, ensuring the backplane pins seat properly into the universal connector block before locking the chassis tabs.
- When using fiber-optic loops, verify that the SFP module is locked inside the cage before mating the LC connector ferrule to the transceiver interface.
- Separate the networking Ethernet cables from adjacent heavy AC motor leads inside wire trays to prevent induced electromagnetic distortion on the 1000 Mbps physical links.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading