The GE IS200VAICH1CBR, also cataloged as the IS200VAICH1C Analog I/O Board, operates as a dedicated hardware component for analog signal acquisition and loop output actuation within GE Mark VI turbine control VME rack assemblies.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200VAICH1CBR |
| Brand | GE |
| Origin | USA |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | VME Bus Backplane Powered |
| Signal Capacity | 10 Analog Inputs / 2 Analog Outputs (via Terminal Board) |
| PCB Coating | Conformal Coated (B Style) |
| Status Display | Front Panel LED Indicators (RUN, FAIL, STAT) |
| Output Load Limit | Up to 500 ohm at 20 mA (1000 ft of 18 AWG cable) |
| Execution Speed | 200 Hz for compressor stall detection routines |
Backplane Bus Communication Velocity & Firmware Flash Compatibility
The IS200VAICH1CBR module mounts in a Mark VI VME processor rack, communicating across the backplane bus to transfer analog loop values and system diagnostics. Firmware routines executed onboard run at a 200 Hz cycle time to process gas turbine compressor stall detection algorithms without system latency. Internal firmware flash compatibility ensures synchronized parameter scanning across both Simplex and Triple Modular Redundant (TMR) controller configurations. High-speed backplane communication velocity maintains real-time telemetry processing across connected I/O terminal boards.
Frequently Asked Questions
Q: What load resistance can the IS200VAICH1CBR drive on its 20 mA analog output channels?
A: The module supports up to a 500 ohm load resistance when driving 20 mA current outputs over 1000 feet of 18 AWG field wiring.
Q: What operational statuses do the front panel LED indicators display?
A: The board features three top-mounted LEDs labeled RUN, FAIL, and STAT to provide physical diagnostic indication of hardware execution, fault conditions, and operational state.
Q: Is the IS200VAICH1CBR compatible with TMR architecture configurations?
A: Yes, the module supports both Simplex and Triple Modular Redundant (TMR) system topologies within the GE Mark VI control platform.
Field Installation Guidelines
- Isolate primary rack power and de-energize the Mark VI VME enclosure before inserting or removing the board assembly.
- Verify that the board's conformal coating and physical components show no mechanical damage prior to installation.
- Align the card edges of the single-width VME board with the card guide rails of the target slot in the VME rack chassis.
- Slide the board inward until the rear edge horizontal connectors mate firmly with the backplane bus.
- Engage the two front panel retaining clips to securely latch the module inside the rack frame.
- Confirm interface connections to the associated 10-input / 2-output terminal board per manual GEH-6421 instructions.
- Apply rack power and verify that the RUN LED illuminates green while the FAIL LED remains off.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
ABB NTAC-02 58967441 Pulse Encoder Interface Module
$99.00
$199.00
GE Fanuc IC610MDL116 Series One Analog Input Module
$99.00
$199.00
ABB 1SBL351001R8011 A50-30-11 DC Contactor
$99.00
$199.00
ABB NDCU-21 63985317B Drive Control Unit
$99.00
$199.00
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
ABB TB840A 3BSE037760R1 Modulebus Cluster Modem
$99.00
$199.00
ABB 1VCR017053G0006 VSC Power Supply and Control Board
$99.00
$199.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
ABB DSBC172 Advant Master Bus Repeater Module
$99.00
$199.00
ABB NPOW-41 Power Supply Board
$99.00
$199.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
ABB FPR3315101R1032 ICSI16D1 CS31 I/O Remote Unit 24 Vdc
$99.00
$199.00
ABB 3BHE021951R0124 KVC758 A124 Power Supply Module
$99.00
$199.00
GE Fanuc A02B-0091-C113 Macro Cassette B Memory Module
$99.00
$199.00
Guide
Translation missing: en.general.search.loading