The GE IS210AEDBH3ADC, also cataloged as the IS210AEDBH3A Analog Input Module, operates as a dedicated hardware component for multi-channel field instrument data acquisition and digital protocol pass-through within GE PLC platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS210AEDBH3ADC |
| Brand | General Electric (GE) |
| Origin | USA |
| Operating Temp | -30 to 65 deg C |
| Power Consumption | 24 VDC or 120 VAC Input |
| Analog Inputs | 8 Channels |
| Resolution | 16-bit |
| Measurement Accuracy | +/-0.196% |
| Signal Protocol | 4-20 mA HART Loop Protocol |
| Channel-to-Channel Isolation | Input: 250 Vrms (or 150 Vrms) / Output: 500 Vrms |
| Mounting | DIN Rail Mounting |
4-20 mA HART Loop Protocol & Channel-to-Channel Isolation
The IS210AEDBH3ADC digitizes 4-20 mA analog feedback loops using a high-resolution 16-bit analog-to-digital converter, achieving a measurement accuracy of +/-0.196% across 8 input channels. Digital modulation signals superimposed via the 4-20 mA HART loop protocol pass directly through the hardware interface without interrupting primary variable sampling routines. To suppress common-mode ground loops and electrical interference from field instrumentation, the circuitry integrates robust input isolation rated at up to 250 Vrms and output isolation rated at 500 Vrms.
Frequently Asked Questions
Q: What are the input channel capacity and conversion parameters for the IS210AEDBH3ADC?
A: The module accommodates 8 analog input channels operating with 16-bit conversion resolution and +/-0.196% measurement accuracy.
Q: What galvanic isolation limits apply to the input and output circuitry?
A: The hardware incorporates input channel isolation rated at 250 Vrms (with specific documentation noting 150 Vrms) and output side isolation rated at 500 Vrms.
Q: What primary power supply configurations can be connected to the module?
A: The power input section supports either a 24 VDC or 120 VAC external power connection depending on cabinet distribution routing.
Field Installation Guidelines
- De-energize all 24 VDC or 120 VAC power sources feeding the DIN rail distribution segment prior to module installation.
- Wear a grounded electrostatic discharge (ESD) wrist strap before handling the printed circuit assembly.
- Hook the top latch of the module onto the standard 35 mm DIN rail, then press firmly until the bottom mounting clip engages.
- Route field 4-20 mA HART signal wiring through twisted-pair shielded cables to limit electromagnetic coupling.
- Terminate all cable shield drain wires at the main system earth ground bar rather than floating them inside the terminal housing.
- Verify channel wiring assignments and ensure field transmitter loop current power matches system supply ratings before applying input voltage.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
ABB NTAC-02 58967441 Pulse Encoder Interface Module
$99.00
$199.00
GE Fanuc IC610MDL116 Series One Analog Input Module
$99.00
$199.00
ABB 1SBL351001R8011 A50-30-11 DC Contactor
$99.00
$199.00
ABB NDCU-21 63985317B Drive Control Unit
$99.00
$199.00
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
ABB TB840A 3BSE037760R1 Modulebus Cluster Modem
$99.00
$199.00
ABB 1VCR017053G0006 VSC Power Supply and Control Board
$99.00
$199.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
ABB DSBC172 Advant Master Bus Repeater Module
$99.00
$199.00
ABB NPOW-41 Power Supply Board
$99.00
$199.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
ABB FPR3315101R1032 ICSI16D1 CS31 I/O Remote Unit 24 Vdc
$99.00
$199.00
ABB 3BHE021951R0124 KVC758 A124 Power Supply Module
$99.00
$199.00
GE Fanuc A02B-0091-C113 Macro Cassette B Memory Module
$99.00
$199.00
Guide
Translation missing: en.general.search.loading