Product Overview
The GE IS220PPRFH1B serves as the primary speed-sensing interface for the Mark VIe and Mark VIeS turbine control platforms. This Proximity Pulse Input (PPRF) pack captures raw frequency signals from magnetic pickups (MPUs) or proximity probes and converts them into deterministic digital data for the controller. We supply this unit as 100% Brand New, ensuring critical safety systems—including overspeed protection and rotor phase monitoring—operate with maximum integrity. It mounts directly to the terminal board, providing a localized, digitized connection to the IONet for gas, steam, and hydro turbine assets.
Technical Specifications
The IS220PPRFH1B processes high-frequency signals across a wide dynamic range to ensure accuracy from turning gear speeds to overspeed trip conditions.
| Feature | Specification |
| Input Channels | 2 Independent Pulse Input Channels |
| Sensor Compatibility | Magnetic Pickups (MPU), Eddy Current Probes, Active Speed Sensors |
| Frequency Range | DC to 20 kHz |
| Voltage Sensitivity | 0.5V to 90V RMS (Auto-Adjusting) |
| Communication | Dual Redundant 10/100 Ethernet (IONet) |
| Isolation | 1500 VDC (Input to Logic) |
| Power Input | 28 VDC Nominal (18 – 32 VDC Range) |
| Current Consumption | 0.5 Amps Max @ 28 VDC |
| Operating Temp | –30°C to +65°C (–22°F to +149°F) |
| Cooling | Fanless Convection |
Engineering Advantages
-
Dynamic Sensitivity Adjustment: The PPRF pack automatically scales its input sensitivity based on frequency. This allows the module to detect weak signals from magnetic pickups during low-speed turning gear operations while maintaining stability during high-voltage pulses at peak turbine RPM.
-
Zero-Speed to Overspeed Coverage: The DC to 20 kHz range enables the IS220PPRFH1B to monitor the entire turbine lifecycle. It tracks the rotor from a dead stop through acceleration and provides the sub-millisecond response times required for emergency overspeed trip logic.
-
Dual-Port IONet Redundancy: Two 10/100 Ethernet ports provide redundant paths for data delivery. If one network branch fails, the pack continues to transmit pulse data without interruption, preventing nuisance trips and ensuring continuous machinery protection.
-
Superior Signal Conditioning: The hardware isolates field inputs up to 1500 VDC. This protection prevents high-voltage transients from the turbine floor from migrating into the Mark VIe control backplane, shielding the processor from electrical noise and potential damage.
FAQs
-
Can the IS220PPRFH1B interface with both passive and active sensors?
Yes. The module supports passive Magnetic Pickups (MPUs) and active proximity probes (Eddy Current Sensors). You configure the channel settings in the ToolboxST software to match the specific transducer type installed on the turbine.
-
Does this module support "Once-Per-Revolution" (Keyphasor) signals?
The IS220PPRFH1B effectively processes pulse signals used for phase reference and speed. For complex vibration analysis requiring specific Keyphasor integration, engineers typically pair this with the corresponding Mark VIe terminal board (such as the TPRO or TPPW).
-
What happens if the input voltage exceeds 90V RMS?
The module features robust internal clamping and auto-ranging logic. However, exceeding the rated 90V RMS for extended periods may cause signal clipping. The auto-adjusting sensitivity ensures the pack maintains a clean pulse edge even as sensor output voltage rises with speed.
-
Is this pack compatible with the Mark VIeS Safety system?
Yes. The IS220PPRFH1B is designed for use in both standard Mark VIe and SIL-rated Mark VIeS Safety configurations, providing the reliable speed data necessary for functional safety loops.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading