330707-00-62-10-01-00 Bently Nevada Proximity Probe

330707-00-62-10-01-00 3300 XL Series Proximity Probe | Bently Nevada

330707-00-62-10-01-00 3300 XL Series Proximity Probe | Bently Nevada

التوفر: 10 متوفر في المخزون

Configured for physical displacement measurement in machine monitoring systems, the Bently Nevada 330707-00-62-10-01-00 (330707 Proximity Probe) provides direct physical/electrical execution....

رمز المنتج: 330707-00-62-10-01-00

Manufacturer: Bently Nevada
Product No.: 330707-00-62-10-01-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 100g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

Configured for physical displacement measurement in machine monitoring systems, the Bently Nevada 330707-00-62-10-01-00 (330707 Proximity Probe) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

The suffix structure of the 330707-AA-BB-CC-DD-EE part number defines specific mechanical and electrical options for the 3300 XL 11 mm Proximity Probe with 5/8-18 UNF threads (without armor):

330707: Base model for 3300 XL 11 mm Proximity Probe, 5/8-18 UNF thread, without armor.
00: Unthreaded Length Option (AA) indicating 0.0 inches (or 0 mm).
62: Overall Case Length Option (BB) indicating 6.2 inches (or 62 mm).
10: Total Length Option (CC) indicating 1.0 meter (3.3 feet). Other standard options include 50 (5.0 meters) and 90 (9.0 meters).
01: Connector and Cable-Type Option (DD) specifying miniature coaxial ClickLoc connector with connector protector, standard cable.
00: Agency Approval Option (EE) indicating no approvals are required.

Hardware Specifications

Parameter	Specification
Model	330707-00-62-10-01-00
Brand	Bently Nevada
Origin	USA
Probe Tip Diameter	11.0 mm
Thread Profile	5/8-18 UNF thread
Cable Material	Standard coaxial cable
Connector Type	Miniature coaxial ClickLoc with connector protector
Operating Temp	-51 to +177 deg C
Power Consumption	Passive sensor (0 W)
Dimensions	11.0 mm tip diameter, 1.0 m cable length
Weight	0.15 kg

Eddy-Current Probe Scaling & Gap Voltage Validation

This 11 mm eddy-current probe utilizes high-frequency electromagnetic field generation to sense distance changes relative to a conductive target. To ensure the correct scaling factor of 3.94 V/mm (100 mV/mil), the probe must be coupled to a matched 3300 XL 11 mm Proximitor sensor through an appropriate extension cable. During physical installation, setting the optimal physical distance requires gap voltage validation. Technicians must adjust the mechanical position until the DC bias voltage output reads -10 VDC, representing the center of the linear calibration envelope. This prevents signal cross-talk suppression and ensures linear tracking of critical rotor dynamics.

Frequently Asked Questions

Q: Can this 330707 probe be directly connected to an 8 mm Proximitor?

A: No. Because of physical tip diameter differences and coil inductance profiles, this 11 mm probe requires an 11 mm Proximitor sensor. Using an 8 mm Proximitor will cause severe impedance mismatch and calibration failure.

Q: Is this probe compatible with hot-swap operations under active power?

A: Yes. The 330707 is a passive sensor containing only a coil. It can be physically disconnected or connected to the extension cable while the Proximitor sensor remains powered, without causing electrical damage.

Field Installation Guidelines

Mechanical Thread Engagement: Thread the probe into the mounting bracket or sleeve. Avoid over-torqueing the 5/8-18 UNF threads; do not exceed 33.9 N-m (300 in-lb) of torque during installation.
Physical Clearance and Gap Alignment: Thread the probe slowly toward the target shaft while checking the DC gap voltage at the Proximitor's coaxial output. Secure the locking nut when the reading reaches -10.0 VDC.
Shielding and Ground Isolation: Ensure the ClickLoc connector protector is properly installed over the connection point. The coaxial cable shield must be isolated from the machine frame ground to prevent ground loop noise from corrupting the dynamic vibration signal.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.