ADV551-P63 S2 Yokogawa Digital Output Module

ADV551-P63 S2 Yokogawa CENTUM VP Output Module

ADV551-P63 S2 Yokogawa CENTUM VP Output Module

التوفر: 20 متوفر في المخزون

Yokogawa ADV551-P63 S2 Digital Output Module The Yokogawa ADV551-P63 S2, also cataloged as the ADV551 Digital Output Module, operates as...

رمز المنتج: ADV551-P63-S2

Manufacturer: Yokogawa
Product No.: ADV551-P63-S2
Product Type: Digital Output Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 350g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

Yokogawa ADV551-P63 S2 Digital Output Module

The Yokogawa ADV551-P63 S2, also cataloged as the ADV551 Digital Output Module, operates as a dedicated hardware component for discrete actuation driving within CENTUM VP and ProSafe-RS control networks.

Suffix Breakdown & Model Matrix

Base Model (ADV551): Digital Output Module featuring 32 isolated output channels operating at 24 VDC.
Function Suffix (-P): Includes pulse width output and time-proportional output functionality for modulated field element control.
Protection Suffix (6): Equips status display LEDs on the front panel and indicates no explosion protection rating.
Environmental Suffix (3): Includes ISA Standard G3 conformal coating and an extended operating temperature rating (-20 to 70 deg C).
Style Code (S2): Hardware circuit design revision level denoting specific component and backplane firmware baseline compatibility.

Hardware Specifications

Parameter	Specification
Model	ADV551-P63 S2
Brand	Yokogawa
Origin	Japan
Weight	0.35 kg (2.0 kg shipping weight)
Dimensions	Standard Yokogawa I/O module footprint
Operating Temp	-20 to 70 deg C
Power Consumption	700 mA max at 5 VDC, 60 mA max at external supply
Output Channels	32 channels, current sink format
Rated Applied Voltage	24 VDC (100 mA/channel max at 26.4 VDC)
Isolation Withstand	2000 VAC between signal and system for 1 minute; 500 VAC between commons
Response Time	<= 1 ms typical
Output Functions	ON/OFF status, pulse width output, time-proportional output

4-20 mA HART Loop & Fieldbus Connectivity Dynamics

The ADV551-P63 S2 provides high-density discrete signal delivery to control valves, solenoid relays, and alarm indicators while operating alongside analog I/O cards within CENTUM CS 3000 / VP node architectures. Integrated pulse-width modulation algorithms allow fine-tuned temporal control over solenoid manifolds without routing processing cycles back to the main CPU module. Ground loop current is decoupled via 2000 VAC optic/galvanic barriers, preventing electrical noise propagation into adjacent 4-20 mA HART instrumentation loops.

Frequently Asked Questions

Q: Does the ADV551-P63 S2 module support hot-swap replacement in active systems?

A: Yes, online replacement is supported when mounted in redundant I/O nests or standard active node slots without interrupting system backplane communication.

Q: What is the maximum sink current allowable per individual output channel?

A: Each channel supports a maximum current sink rating of 100 mA at 26.4 VDC.

Q: How is the common return path partitioned across the 32 output channels?

A: Common connections are split every 16 channels on the common minus (-) side, providing 500 VAC withstand voltage between distinct common groups.

Field Installation Guidelines

Field Supply Isolation: De-energize external 24 VDC field load power supplies prior to connecting field wiring harnesses to prevent accidental terminal shorting.
Shield & Grounding Setup: Connect signal cable shields directly to the cabinet instrumentation ground bar to ensure optimal noise immunity and surge protection.
Module Insertion: Slide the card along node guide rails until the backplane connector locks in place, then tighten upper and lower panel thumbscrews.
Conductor Separation: Route 24 VDC digital output wiring through cable ducts separate from AC power conduits and high-frequency communication trunks.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.