F3PU30-0S Yokogawa FA-M3 Series Datasheet & Technical Manual

F3PU30-0S FA-M3 Yokogawa PLC Power Supply Module

F3PU30-0S FA-M3 Yokogawa PLC Power Supply Module

التوفر: 20 متوفر في المخزون

Yokogawa F3PU30-0S FA-M3 Power Supply Module The Yokogawa F3PU30-0S, also cataloged as the F3PU30 Power Supply Module, operates as a...

رمز المنتج: F3PU30

Manufacturer: Yokogawa
Product No.: F3PU30
Product Type: Power Supplies
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 380g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

Yokogawa F3PU30-0S FA-M3 Power Supply Module

The Yokogawa F3PU30-0S, also cataloged as the F3PU30 Power Supply Module, operates as a dedicated hardware component for converting AC mains voltage into regulated logic power within Yokogawa FA-M3 PLC base chassis platforms. Mounted directly onto the leftmost power slot of the backplane, the unit provides a continuous 5 VDC power bus up to 6 A to drive CPU processors, sequence modules, and high-density I/O cards. Operating across a wide AC input spectrum, the integrated power assembly suppresses line transients while maintaining stable voltage rails across internal processing slots.

Suffix Breakdown & Model Matrix

Suffix Code	Specification	Functional Description
F3PU30	Base Model	FA-M3 Series System Power Supply Module
-0S	Standard Specification	100-240 VAC wide-range AC input specification

Hardware Specifications

Parameter	Specification
Model	F3PU30-0S
Brand	Yokogawa
Origin	Japan
Weight	0.38 kg net (0.84 lbs / 3.0 kg shipping package)
Dimensions	28.9 mm W x 100 mm H x 83.2 mm D
Operating Temp	0 to +55 deg C
Power Consumption	100 VA maximum
Input Voltage Range	100-240 VAC (50/60 Hz)
Output Voltage	5 VDC regulated system bus output
Output Current Rating	6 A continuous supply current
Isolation Voltage	Galvanic isolation between primary AC input and system logic bus

4-20 mA HART Loop Protocol & Channel-to-Channel Isolation Integration

The F3PU30-0S power supply incorporates high-efficiency switching circuits flanked by internal galvanic isolation barriers to prevent AC mains line noise from corrupting low-voltage system logic. When powering FA-M3 chassis racks housing 4-20 mA HART loop protocol interface modules or sensitive thermocouple CJC (cold junction compensation) cards, the unit limits common-mode noise propagation. The regulated 5 VDC rail maintains strict voltage stability under shifting load conditions, eliminating power-induced cross-talk across adjacent channel-to-channel isolated analog input cards.

Frequently Asked Questions

Q: What happens if the combined internal 5 VDC current consumption of installed modules exceeds 6 A?

A: Exceeding the 6 A threshold triggers the module internal overcurrent protection, causing output voltage suppression or shutdown to protect backplane logic cards from thermal overload.

Q: Can multiple F3PU30-0S power modules be installed in parallel within the same FA-M3 base unit to double current capacity?

A: No. Standard FA-M3 base units dedicate a single designated slot for the power supply module. Parallel load sharing across standard power slots is not supported.

Q: Does the module feature internal primary circuit fuse protection?

A: Yes. The AC input stage contains an internal fuse designed to clear destructive short-circuit faults and protect the host control cabinet from primary line overload.

Field Installation Guidelines

Dedicated Power Slot Alignment: Insert the F3PU30-0S exclusively into the leftmost power supply slot of the FA-M3 base chassis to establish correct internal 5 VDC bus engagement.
AC Supply Circuit Protection: Install an external 2-pole circuit breaker or line filter on the incoming 100-240 VAC line to facilitate localized maintenance isolation.
Ground Wire Low-Impedance Bonding: Connect the protective earth (PE) screw terminal on the module front panel directly to the cabinet ground bar using a short, heavy-gauge copper conductor.
Convection Cooling Clearance: Ensure at least 50 mm of vertical clearance above and below the module chassis to facilitate free air movement and prevent thermal buildup.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.