The General Electric IC695CRU320 is a high-performance Redundancy Processor designed for the PACSystems RX3i platform. Engineered for critical industrial applications requiring high availability, this CPU module enables hot-standby configurations to minimize process downtime. In a redundant setup, the module facilitates an automatic, seamless transfer of control from a primary rack to a secondary rack in the event of a detected failure, with a switchover time of one logic scan (minimum 3.133 msec).
Features
- Intel Celeron M processor operating at 1 GHz.
- Supports redundant or hot-standby system configurations.
- Equipped with 64 MB of battery-backed RAM and 64 MB of non-volatile flash memory.
- Integrated Error Checking and Correction (ECC) for RAM data integrity.
- Two integrated serial communication ports supporting RS232 and RS485 standards.
- Occupies two slots in the RX3i chassis.
- Dedicated System Fault (Sys Flt) and I/O Force front-facing status LEDs.
Applications
This processor is intended for complex, mission-critical automation environments where controller failure cannot be tolerated. It is widely utilized in large-scale process control, energy management, and manufacturing systems where high availability and rapid fault recovery are essential. The module supports synchronization links (IC695RMX128/228) for high-speed data transfer between redundant controller pairs.
Technical Specifications
| Model | IC695CRU320 |
| Processor | Intel Celeron M (1 GHz) |
| User RAM | 64 MB (Battery-backed) |
| Flash Memory | 64 MB (Non-volatile) |
| Switchover Time | Max 1 logic scan (min 3.133 msec) |
| Serial Ports | 2 (RS232/RS485) |
| Slot Occupancy | 2 Slots |
| Operating Temp | 0 degC to 60 degC |
| Power Requirements | +3.3 VDC (1.0A), +5 VDC (1.2A) |
Installation Guidelines
- Ensure the rack is powered down before inserting or removing the CPU module to prevent electrical damage.
- The module is rated as open equipment (IP20); installation in a NEMA/UL Type 1 or equivalent protective enclosure is required to prevent ingress of dust, moisture, or contaminants.
- Proper grounding practices must be followed to maintain noise immunity and protect the internal circuitry.
- Requires an external high-capacity battery (IC693ACC302) for long-term memory retention.
- Handle the module using proper ESD precautions to prevent static discharge damage to the internal components.
FAQ
What is the primary function of the IC695CRU320?
It acts as a redundancy processor for PACSystems RX3i systems, providing automatic failover to a standby controller to maintain continuous operation during hardware faults.
What additional hardware is needed for redundancy?
The system requires a Redundant Memory Exchange (RMX) module, such as the IC695RMX128 or IC695RMX228, to synchronize data between the primary and secondary processors.
How is user data protected during power loss?
The module features 64 MB of battery-backed RAM and 64 MB of non-volatile flash memory to ensure that programs and critical data are retained when power is disconnected.
ماذا يقول عملاؤنا عنا؟
دعم طوارئ ممتاز!
تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.
مارك تومسون
مدير الصيانة، الولايات المتحدة الأمريكيةمصدر موثوق لقطع الغيار الجديدة
يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.
روبرت هوفمان
رئيس قسم الهندسة، ألمانياخدمة وجودة من الدرجة الأولى
نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.
لوكاس مولر
مدير العمليات، ألمانياالمنتجات ذات الصلة
General Electric IC670ALG310 Analog Output Module
$99.00
$199.00
General Electric 531X139APMARM7 Controller Application Board
$99.00
$199.00
GE Fanuc DS200SBCBG1A Mark V Brake Control Card
$99.00
$199.00
GE Fanuc IS200EPDMG1B Exciter Power Distribution Board
$99.00
$199.00
GE Fanuc DS200CDBAG1A Contactor Driver Board
$99.00
$199.00
GE Fanuc DS200PCTMG1A Power CT Monitor Drive Board
$99.00
$199.00
General Electric IS200EDEXG1A Exciter De-Excitation Board
$99.00
$199.00
GE Fanuc IC693MDL740F Series 90-30 16-Point DC Output Module
$99.00
$199.00
General Electric IC609SJR100 I/O Link Master Module
$99.00
$199.00
GE Fanuc IC752SPL014 EX2100 Operator Interface Terminal
$99.00
$199.00
GE Mark VI IS200VTURH1BAC Primary Turbine Protection Board
$99.00
$199.00
GE Fanuc 531X309SPCAJG1 Digital Signal Processor Card
$99.00
$199.00
General Electric IC693DSM302 Motion Mate Control Module
$99.00
$199.00
GE Fanuc 531X306LCCBFM1 Drive Control Board and Display Card
$99.00
$199.00
GE Fanuc 531X111PSHARG1 Mark V Power Supply Card
$99.00
$199.00
General Electric IC600YB842 Series Six Analog Input Module
$99.00
$199.00
GE Fanuc 531X307LTBAKG1 LAN Terminal Board
$99.00
$199.00
GE Fanuc IC200MDD843 Versamax Discrete Mixed I/O Module
$99.00
$199.00
General Electric DS200TCQAG1BGE RST Analog Termination Board
$99.00
$199.00
GE Fanuc DS200RTBAG3AEB Relay Terminal Module
$99.00
$199.00
GE Fanuc DS3800NMEC1K1K Mark IV Motor Exciter Control Board
$99.00
$199.00
لوحة طرفية للإدخال التناظري IS200TBAIH1CDD GE Mark VI
$99.00
$199.00
لوحة توصيل الإدخال التناظري GE IS200TBAIH1CDC Mark VI
$99.00
$199.00
IS200EGDMH1AGG وحدة الكشف الأرضي EX2100 | جنرال إلكتريك
$99.00
$199.00
وحدة الكشف عن التأريض GE IS200EGDMH1AEF EX2100 للمثير
$99.00
$199.00
وحدة جسر وإثارة وحماية GE طراز IS200EGDMH1ADE
$99.00
$199.00
IS200VTURH1BAB | GE | وحدة حماية التوربينات Mark VI
$99.00
$199.00
GE Mark VI VME بطاقة إدخال RTD | IS200VRTDH1DAB
$99.00
$199.00
لوحة التحكم الرئيسية GE IS200VCMIH1BCD Mark VI VME Bus
$99.00
$199.00
وحدة إدخال الاتصال المنفصل GE IS220PDIAH1A Mark VIe
$99.00
$199.00
بطاقة الخيار لمنظم الإثارة IS200EROCH1ABC GE EX2100
$99.00
$199.00
لوحة منظم الإثارة GE IS200ERDDH1ABB EX2100
$99.00
$199.00
مرشد
Translation missing: ar.general.search.loading