SB401-10-S1 YOKOGAWA CENTUM VP Datasheet & Technical Manual

SB401-10-S1 YOKOGAWA CENTUM CS ESB Bus Interface Card

SB401-10-S1 YOKOGAWA CENTUM CS ESB Bus Interface Card

التوفر: 20 متوفر في المخزون

YOKOGAWA SB401-10-S1 CENTUM ESB Bus Interface Slave Module Configured for high-speed ESB bus communication in CENTUM CS and CENTUM VP...

رمز المنتج: SB401-10 S1

Manufacturer: Yokogawa
Product No.: SB401-10 S1
Product Type: Bus Interface Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 300g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

YOKOGAWA SB401-10-S1 CENTUM ESB Bus Interface Slave Module

Configured for high-speed ESB bus communication in CENTUM CS and CENTUM VP platforms, the YOKOGAWA SB401-10-S1 (SB401 ESB Bus Interface Slave Module) provides direct physical/electrical execution for interconnecting Field Control Units (FCU) to downstream Node Units.

Hardware Specifications

Parameter	Specification
Model	SB401-10-S1
Brand	Yokogawa Electric Corporation
Origin	Japan
Weight	0.3 kg
Dimensions	32.8 mm x 143 mm x 130 mm
Operating Temp	0 deg C to +55 deg C
Power Consumption	Standard backplane power from FIO Node Unit
Bus Type	ESB Bus (Slave Interface)
Transmission Speed	128 Mbps
Maximum Transmission Distance	10 m (ESB bus cable run)
Redundancy Support	Dual-redundant configuration (installed in paired slots)

Process Control & Channel Isolation Characteristics

Field engineers deploy the SB401-10-S1 module within FIO Node Units (such as ANB10D or ANB10S) or Base Plate A2BE2D assemblies to maintain real-time data link integrity over the 128 Mbps ESB bus. Paired with EC401 or EC402 ESB Bus Coupler Modules, the hardware facilitates high-speed signal passing between central controllers and up to 9 connected node units. Galvanic and electrical shielding across the backplane bus isolates high-frequency digital noise and voltage spikes, ensuring stable 4-20 mA HART loop protocol communications, fieldbus telemetry, and IO channel processing without logic degradation.

Frequently Asked Questions

Q: What physical adapter hardware is required to complete the external ESB bus cabling on the SB401-10-S1?

A: The module requires an ESB Bus Adapter (A2EE1A). Depending on the node's position in the topology, technicians fit either the connector version (A2EE1A-N) for pass-through cabling or the terminator version (A2EE1A-T) for end-of-line bus termination.

Q: How is dual-redundant bus operation configured using the SB401-10-S1 module?

A: Dual-redundancy requires two identical SB401-10-S1 modules installed in dedicated B1 and B2 slots of the FIO Node Unit. In single non-redundant setups, the module populates slot B1 while a dedicated dummy cover protects slot B2.

Q: What happens to bus communication if one module fails in a dual-redundant pair?

A: The slave node architecture detects signal loss or hardware fault on the active channel and automatically switches control traffic to the standby module without interrupting 128 Mbps I/O data transmission to the Field Control Unit.

Field Installation Guidelines

Verify that node rack power is disabled and proper ESD grounding precautions are in place before inserting the SB401-10-S1 module into slot B1 or B2. Align the module housing with the node chassis guide rails and push firmly until the backplane connector seats completely. When configuring a single non-redundant node, always install a protective dummy cover over the unused B2 slot to prevent thermal bypass and dust accumulation. Ensure the external ESB bus cable length does not exceed the maximum 10-meter limit between nodes, and install the A2EE1A-T termination adapter at the final bus drop to prevent signal reflections. Maintain passive cabinet airflow to ensure ambient operating temperatures remain between 0 deg C and +55 deg C.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.