9802 Triconex Main Processor Datasheet & Technical Manual

TMR Processor Module CPU Processors | Triconex 9802

TMR Processor Module CPU Processors | Triconex 9802

التوفر: 20 متوفر في المخزون

Triconex 9802 Main Processor Module Configured for executing application programs and system logic in Triconex safety platforms, the Triconex 9802...

رمز المنتج: 9802

Manufacturer: ICS Triplex
Product No.: 9802
Product Type: CPU Processors
Product Origin: USA
Payment:T/T, Western Union
Weight: 1200g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

Triconex 9802 Main Processor Module

Configured for executing application programs and system logic in Triconex safety platforms, the Triconex 9802 (9802 Main Processor Module) provides direct physical/electrical execution.

Hardware Specifications

Parameter	Specification
Model	9802
Brand	Triconex
Origin	United States
Weight	1.2 kg
Dimensions	Standard Tricon chassis module size
Operating Temp	0 to 60 deg C
Storage Temp	-40 to +85 deg C
Relative Humidity	5 to 95%, non-condensing
Power Consumption	8 W (typical)
Operating Voltage	24 VDC (18 to 32 VDC input range)
System Processor	Dual RISC processors
Memory Capacity	16 MB non-volatile RAM
System Architecture	Triple Modular Redundant (TMR) 2oo3
Safety Certification	IEC 61508 SIL 3
Communication Protocols	Modbus RTU, Modbus TCP/IP, Peer-to-Peer Triconex
Physical Interfaces	RS-232, RS-485, Ethernet (10/100 Mbps)
Hot-Swap Capability	Supported via online chassis backplane insertion

Triple Modular Redundancy and Fail-Safe State Execution

The hardware operates using a triple modular redundancy (TMR) 2oo3 architecture to execute continuous fault isolation and system logic validation. Three separate internal sub-channels execute user application programs concurrently, validating results through hardware voting circuits prior to updating output variables. This engineering design meets IEC 61508 SIL 3 safety standards, enforcing automatic fail-safe state execution upon detection of non-recoverable internal processor discrepancies or clock desynchronization. Internal diagnostic routines continuously sample hardware registers and verify data integrity across the dual RISC processor architecture to contain faults before they impact process safety functions.

Frequently Asked Questions

Q: How does the processor memory retain the application logic during a complete loss of external 24 VDC backplane power?

A: The module contains 16 MB of non-volatile RAM. When the input voltage drops below the 18 VDC minimum operating threshold, internal shutdown logic saves volatile operational variables directly into the non-volatile memory sector, preventing data corruption without requiring continuous external battery backup.

Q: What are the deterministic constraints when replacing an active 9802 processor module during online system operations?

A: The chassis backplane supports online hot-swap deployment. Inserting a replacement module triggers automatic background equalization, copying the active running memory state and application parameters from the remaining operational processors into the new module without affecting control loop execution timing or safety response deadlines.

Field Installation Guidelines

Chassis Insertion and Keying: Inspect the rear backplane connectors for pin alignment prior to installation. Insert the module into the designated slot rails of the Tricon chassis and apply steady force until the top and bottom mechanical ejector levers lock flush against the chassis frame.
Backplane Isolation and Grounding: Ensure the chassis enclosure connects directly to the master plant instrument ground using a low-impedance copper strap. Maintain separation between high-voltage power routing and the low-voltage communication cables attached to the RS-232/RS-485 interfaces to minimize signal interference.
Network Cable Termination: Connect Ethernet links using double-shielded twisted-pair (SFTP) Category 5e or Category 6 cables. Ground the cable shields strictly at the patch panel side or chassis grounding bar, leaving the field end ungrounded to avoid hazardous ground loops.
Firmware Verification Matrix: Confirm that the internal firmware build version of the incoming module matches the exact software version running on the paired active processors before switching the unit into active control mode.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.