ANB10D-415/CU2T/NDEL Yokogawa Node Unit

Yokogawa ANB10D-415/CU2T/NDEL ESB Bus Node Unit

Yokogawa ANB10D-415/CU2T/NDEL ESB Bus Node Unit

التوفر: 10 متوفر في المخزون

Yokogawa ANB10D-415/CU2T/NDEL Node Unit Configured for high-speed signal routing in CENTUM VP Distributed Control System platforms, the Yokogawa ANB10D-415/CU2T/NDEL (ANB10D...

رمز المنتج: ANB10D-410/NDEL

Manufacturer: Yokogawa
Product No.: ANB10D-410/NDEL
Product Type: Node Interface Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 12000g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

Yokogawa ANB10D-415/CU2T/NDEL Node Unit

Configured for high-speed signal routing in CENTUM VP Distributed Control System platforms, the Yokogawa ANB10D-415/CU2T/NDEL (ANB10D Node Unit) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

ANB10D: Node Unit for Dual-Redundant ESB Bus
-4: Dual-redundant power supply configuration
1: 100 to 120 V AC power supply input
5: Basic type with no intrinsic explosion protection
/CU2T: Connector Unit with Terminator for ESB Bus [Part No. S9564FA (2 pieces included)]
/NDEL: Software license enablement for Node Expansion

Hardware Specifications

Parameter	Specification
Model	ANB10D-415/CU2T/NDEL
Brand	Yokogawa
Origin	Japan
Weight	12 kg (Shipping Weight) / Node Unit: approximately 6.0 kg
Dimensions	Standard rack-mount chassis configuration
Operating Temp	-20 deg C to +70 deg C (when continuous ISA G3 option is applied)
Power Consumption	100 to 120 V AC, 50/60 Hz supply
Bus Interface	Dual-redundant ESB Bus
Isolation	1500 V AC withstand voltage (bus-to-system)
Diagnostics	Integrated self-diagnostics with LED status indicators
Compatibility	CENTUM VP and ProSafe-RS control systems

DCS Process Control & Instrumentation Attributes

The ANB10D-415/CU2T/NDEL executes physical bus arbitration and deterministic communication over the dual-redundant ESB Bus backplane. Incorporating dual-redundant power supply modules, the unit ensures continuous communication and power distribution to down-rack I/O modules during individual utility line or supply-circuit failure. The /CU2T option integrates dual S9564FA connector units equipped with physical terminal networks, suppressing transmission line reflection and maintaining signal integrity over extended FIO rack configurations.

Frequently Asked Questions

Q: What function does the /NDEL suffix option perform on the ANB10D node?

A: The /NDEL option supplies the designated software expansion license, unlocking the firmware capability required to recognize and address auxiliary expansion nodes connected downstream.

Q: Can this unit operate inside hazardous areas requiring intrinsic safety rating?

A: No. Suffix "5" specifies a basic type containing no intrinsic explosion protection. If input/output signals originate from hazardous environments, external isolated barrier cards must be utilized between the node I/O modules and field instruments.

Q: How is the physical ESB Bus terminated on the ANB10D-415/CU2T/NDEL?

A: Termination is executed via the /CU2T option, which supplies two hardware terminator plug blocks (S9564FA) that lock onto the dedicated ESB Bus interfaces to terminate the bus impedance.

Field Installation Guidelines

Mounting Protocol: Install the node unit into standard 19-inch instrument racks. Secure all mounting screws to the cabinet frame to ensure a solid mechanical and electrical ground reference.
Power Connections: Route dual independent 100 to 120 V AC lines to the redundant power supplies. Ground the chassis directly to the primary instrument protective earth (PE) busbar.
Cable Routing: Connect the ESB Bus cables to the /CU2T connectors. Do not exceed the maximum allowed physical bending radius of the communication cables to prevent transmission impedance mismatch.
Environmental Control: Verify that cabinet cooling maintains ambient conditions below 70 deg C (or 60 deg C for optimal components lifespan) to prevent diagnostic faults or thermal drift within adjacent analog modules.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.