PW482-50 YOKOGAWA PW482 Series Datasheet & Technical Manual

Yokogawa PW482-50 Power Supply Module Centum VP Series

Yokogawa PW482-50 Power Supply Module Centum VP Series

التوفر: 10 متوفر في المخزون

YOKOGAWA PW482-50 Power Supply Module Configured for power distribution in Centum VP and ProSafe-RS control platforms, the YOKOGAWA PW482-50 (PW482...

رمز المنتج: PW482

Manufacturer: Yokogawa
Product No.: PW482
Product Type: Power Supply Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

YOKOGAWA PW482-50 Power Supply Module

Configured for power distribution in Centum VP and ProSafe-RS control platforms, the YOKOGAWA PW482-50 (PW482 Power Supply Module) provides direct physical/electrical execution. This hardware component delivers stabilized DC power to field control units and safety systems, ensuring regulated output voltages of 24 V and 5.1 V within industrial process environments.

Suffix Breakdown & Model Matrix

Suffix Code	Specification
PW482	Base Power Supply Module
-5	Standard type, no explosion protection
-E	Standard type with explosion protection
0	Basic type
1	ISA Standard G3 option (-20 deg C to +70 deg C)
-50	Enhanced variant with dual regulated DC outputs (24 V / 5.1 V)

Hardware Specifications

Parameter	Specification
Model	PW482-50
Brand	Yokogawa
Origin	Japan
Weight	2.0 kg
Dimensions	199.5 mm × 190 mm × 149 mm
Operating Temp	-20 deg C to +70 deg C (G3 option)
Power Consumption	230 VA
Input Voltage	220 to 240 V AC ±10%
Frequency	50/60 Hz ±3 Hz
Redundancy	Dual-redundant supported (2oo2)

Process Control and DCS Connectivity

The PW482-50 utilizes dedicated backplane integration to maintain internal system stability. Unlike general-purpose industrial power supplies, this module features internal channel-to-channel isolation and surge protection specifically calibrated for Yokogawa FCU/FIO/ESB bus architectures. The unit requires specific slot placement (P1-P2) on supported base plates (A2BE1D/A2BE2D) to ensure proper galvanic isolation and backplane bus communication velocity. In dual-redundant configurations, the module manages automatic load sharing and maintains continuous voltage regulation during primary supply failure.

Frequently Asked Questions

Q: Can the PW482-50 be hot-swapped in a running system?

A: Yes, provided the system backplane supports redundant power configurations. In a dual-redundant setup (two modules installed in P1 and P2), one module may be removed or replaced without interrupting the 24 V / 5.1 V DC output to the field control unit.

Q: What is the primary difference between the base PW482 and the -50 variant?

A: The standard PW482 is designed for generic FCU/FIO unit support. The -50 suffix specifically incorporates dual regulated DC outputs (24 V / 5.1 V) required for ProSafe-RS Safety Control System (SCS) logic solvers.

Field Installation Guidelines

Environmental Preparation: Ensure the mounting area is free from conductive dust and corrosive gases. The G3 rated modules are designed for high-humidity environments, but the enclosure must maintain specified IP ratings.
Slot Orientation: The module must be inserted into slots P1 and P2 of the designated base plate. For single-power configurations, only slot P1 must be occupied.
Grounding: Secure the module to the base plate using the integrated fastening screws to ensure a low-impedance connection to the chassis protective earth (PE).
Cabling: Utilize shielded AC input cables to minimize electromagnetic interference (EMI). Maintain a minimum distance of 100 mm from high-voltage AC lines to prevent crosstalk on internal signal buses.
Validation: Before applying 220-240 V AC power, verify that the module keying pins align with the base plate to prevent incorrect voltage input or mechanical misalignment.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.