IC697ALG230 GE Base Converter Module

GE IC697ALG230 Series 90-70 Base Converter Module

GE IC697ALG230 Series 90-70 Base Converter Module

Disponibilidad: 10 Quedan en stock

The GE IC697ALG230, also cataloged as the IC697ALG230 Base Converter Module, operates as a dedicated hardware component for analog signal...

Código: IC697ALG230

Manufacturer: GE Fanuc
Product No.: IC697ALG230
Product Type: Analog Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 820g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE IC697ALG230, also cataloged as the IC697ALG230 Base Converter Module, operates as a dedicated hardware component for analog signal acquisition and digitization within Series 90-70 PLC platforms. The unit processes up to eight differential analog inputs utilizing an integrated analog-to-digital converter circuit with hardware-level optical isolation to separate the field circuitry from the host backplane logic.

Hardware Specifications

Parameter	Specification
Model	IC697ALG230
Brand	GE Fanuc Emerson
Origin	USA
Weight	0.82 kg (1.81 lbs)
Dimensions	Single-slot rack width
Operating Temp	0 to 60 deg C
Power Consumption	4.0 W (0.8 A @ 5 VDC)
Number of Inputs	8 differential channels (expandable to 120 max)
Input Signal Ranges	-10 VDC to +10 VDC, 4-20 mA (0.0 mA to 22.5 mA max)
Data Resolution	16-bit channel configuration / 14-bit internal ADC
Fast Update Rate	2.4 ms to 2.8 ms
Linearity	+/- 0.02% of full scale
Voltage Accuracy	+/- 0.01% of full scale, +/- 0.02% of value
Current Accuracy	+/- 0.05% of full scale, +/- 0.1% of value
Isolated Interface	1500 VDC field-to-logic opto-isolation
Removable Connector	40 pins terminal block with jack screw mechanism

Industrial Control and Network Determinism

The IC697ALG230 uses dedicated backplane bus communication velocity protocols to ensure real-time transmission of digitized process values to the main processor. Through its physical expansion port interface, the module governs I/O density scaling profiles by controlling up to seven expansion units (IC697ALG440 or IC697ALG441), scaling total infrastructure density up to 120 inputs. Firmware flash compatibility enables individual low-pass filtering and per-channel CPU alarm interrupt routing, mitigating data collection jitter across high-density networks.

Frequently Asked Questions

Q: Does the IC697ALG230 base converter module support hot-swapping while the rack is powered?

A: No. The Series 90-70 backplane requires total electrical isolation before hardware configuration adjustments. Upstream power feeding the +5 VDC logic bus must be disconnected before the module is extracted or inserted to prevent backplane bus errors or component degradation.

Q: How does the differential wiring configuration on the 40-terminal block mitigate field noise?

A: The differential architecture measures the signal voltage vector relative to two signal lines rather than a single shared ground reference. This configuration provides high common-mode rejection against external electromagnetic interference (EMI) on the 4-20 mA and +/- 10 VDC measurement loops.

Field Installation Guidelines

Terminal Block Maintenance: Use the integrated jack screws on the 40-terminal front block to engage or disengage the wiring bundle interface cleanly. Ensure all field wiring pairs match the terminal designations on the module door card insert.
Expander Port Serial Interconnection: When linking IC697ALG440 or IC697ALG441 expander sub-modules to the expansion port, enforce the maximum limit of seven expanders per base converter to prevent synchronization timeouts and timing jitter.
Shield Grounding Infrastructure: Shielded twisted-pair (STP) cabling must be applied to all voltage and current sensor inputs. Terminate the overall drain wires at the chassis master earthing bar, keeping signal cables isolated from parallel high-voltage AC motor lines.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.