D0162LQ Foxboro Operator Interface Panel Datasheet

التوفر: 10 متوفر في المخزون

Foxboro D0162LQ Operator Interface Panel The Foxboro D0162LQ/H, also cataloged as the D0162LQ Indicator Module, operates as a dedicated hardware...

رمز المنتج: D0162LQ/H

Manufacturer: Foxboro
Product No.: D0162LQ/H
Product Type: Operator Interface Panels
Product Origin: USA
Payment:T/T, Western Union
Weight: 168g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

Foxboro D0162LQ Operator Interface Panel

The Foxboro D0162LQ/H, also cataloged as the D0162LQ Indicator Module, operates as a dedicated hardware component for localized data visualization and diagnostic execution within Mesh Control Network platforms. The component establishes direct physical interface links with the FCM100E module, operating at a data throughput speed of 100 Mbps across the control infrastructure.

Hardware Specifications

Parameter	Specification
Model	D0162LQ/H
Brand	Foxboro (Schneider Electric)
Origin	USA
Weight	0.37 lbs (1 kg shipping weight)
Dimensions	Standard FCM100E slot footprint
Operating Temp	-20 to +60 deg C
Power Consumption	Sourced via system backplane connection
Display Type	LCD Indicator Module
Network Velocity	100 Mbps Mesh Control Network
Environmental Resistance	Class G3 - ISA S71.04 harsh environment rating
Termination Type	Screw-clamp terminals (12-22 AWG)
Enclosure Rating	IP20 (cabinet installation required)
Storage Temp	-40 to +85 deg C

Process Control & DCS Instrumentation Properties

The hardware acts as a physical node interface processing diagnostic data streams directly from the network layer. Channel-to-channel isolation circuits safeguard the internal processing bus from external electrical noise and ground voltage variations. The operator interface structure interfaces directly with the 100 Mbps Mesh Control Network, utilizing standard protocols to mirror process parameters from paired fieldbus modules and display loop dynamics without introducing channel latency or data degradation.

Frequently Asked Questions

Q: What specific environmental rating governs the protection of the internal circuitry?

A: The hardware is certified to Class G3 specifications according to ISA S71.04, rendering it resistant to continuous chemical and corrosive particulate exposures commonly found in unregulated control environments.

Q: Does the indicator panel require independent external power routing?

A: No external power connections are necessary. The assembly derives its operational voltage directly from the system rack backplane when seated in its designated slot pairing.

Field Installation Guidelines

Backplane Insertion: Guide the module along the chassis rails into the FCM100E assembly socket. Apply uniform pressure until the locking tabs snap into place, establishing firm connection with the 100 Mbps data plane.
Shield Grounding Constraints: Ground all external network and signal shielding lines at a single common master ground point within the instrument enclosure. Do not create loops by grounding both ends of the cable run.
Thermal Management: Mount the unit vertically within an IP20 enclosure, keeping a minimum clearance of 50 mm above and below the housing to maintain temperature values within the -20 to +60 deg C operational envelope.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.