Foxboro P0972QR 32-Channel Termination Assembly

Foxboro P0972QR 32-Channel Termination Assembly | New Stock

Availability: 10 left in stock

Foxboro P0972QR I/A Series Termination Assembly The Foxboro P0972QR, also cataloged as the P0972QR Termination Assembly Module, operates as a...

SKU: P0972QR

Manufacturer: Foxboro
Product No.: P0972QR
Product Type: Termination Assembly Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 750g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro P0972QR I/A Series Termination Assembly

The Foxboro P0972QR, also cataloged as the P0972QR Termination Assembly Module, operates as a dedicated hardware component for organizing, routing, and isolating analog and digital I/O signals within Foxboro I/A Series distributed control systems. Configured to interface directly with Fieldbus Modules (FBMs) linked to FCP270 and FCP280 controllers, the module executes point-to-point physical termination for 32 independent field wiring connections.

Hardware Specifications

Parameter	Specification
Model	P0972QR
Brand	Foxboro
Origin	USA
Weight	750 g
Dimensions	145 x 170 x 40 mm
Operating Temp	0 to +60 deg C (32 to 140 deg F)
Power Consumption	<= 8.5 W
Channels	32 input/output points (analog and digital)
Isolation	Galvanic isolation per channel
Power Supply	24 VDC Nominal
Redundant Input	Supported (dual power paths)
Mounting	DIN-rail or modular baseplate
Certifications	CE, RoHS, IEC 61131-2
Environmental Resistance	Resistant to vibration, dust, and humidity

Process Control & DCS Instrumentation Matrix

The assembly incorporates a 32-channel termination layout configured to maintain signal integrity through per-channel galvanic isolation. This electrical barrier blocks common-mode voltage surges and prevents ground loop currents from propagating across the field wiring interface to the active FBM electronics or backplane logic. For analog channels utilizing the 4-20 mA HART loop protocol, the internal circuit trace architecture is balanced to suppress near-end cross-talk during parallel data acquisition sequences. Built-in surge protection limits clamping voltage thresholds to safeguard downstream system components from field-induced electrical transients.

Frequently Asked Questions

Q: How is power redundancy implemented across the P0972QR termination assembly?

A: The module features dual, redundant 24 VDC power input terminals wired through internal auctioneering diodes. If the primary power supply path experiences a voltage drop or absolute failure, the secondary power bus instantaneously assumes the full electrical load without interrupting the 32 active I/O channels or causing signal attenuation.

Q: Does the galvanic isolation on this assembly remove the requirement for isolated field instruments?

A: Yes, the integrated channel-to-channel galvanic isolation decouples the field reference point from the internal DCS logic. Non-isolated field sensors can be wired directly to the compression terminals without inducing ground loop faults or cross-channel electrical noise.

Field Installation Guidelines

Mounting Infrastructure: Mount the assembly on a standard 35 mm DIN-rail or integrate it directly into a modular Foxboro baseplate. Verify that the mechanical grounding clips make clean, unpainted contact with the metal rail to ensure low-resistance surge diversion paths.
Wiring Discipline and Strain Relief: Route the 32 signal lines through dedicated wire ducts. Ensure all compression screw terminals are tightened to specified torque ratings to prevent localized heating or high-contact-resistance faults across the analog/digital loops.
Shield Grounding Regulations: Connect all field instrument cable shields to the designated single-point grounding bar provided on the assembly or cabinet frame. Do not tie shields at both ends, as this will introduce circulating currents that diminish the effectiveness of the module's galvanic isolation.
Thermal Clearence: Maintain a minimum space configuration of 50 mm above and below the module housing inside the enclosure to facilitate passive convection cooling and keep localized temperatures below the +60 deg C maximum operational threshold.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.