The Honeywell 8C-PDODA1 51454472-175 functions as a high-density 24VDC digital output interface within the Experion PKS C300 I/O subsystem. This brand-new, original module translates controller logic into physical electrical signals to drive field equipment. It manages critical assets including solenoids, relays, and motor starters across demanding industrial environments like refineries and power plants.
| Parameter | Specifications |
| Model Number | 8C-PDODA1 |
| Part Number | 51454472-175 |
| Channel Density | 32 Channels |
| Output Voltage | 24 VDC (Nominal) |
| Current Load | Up to 0.5 A per channel |
| Isolation | Channel-to-channel and channel-to-ground |
| Operating Temp | –20 °C to +70 °C |
| System Compatibility | Honeywell C300 Controller / FIM |
| Redundancy | Supports Redundant I/O Configurations |
| Condition | 100% Brand New Original |
Hot-Swappable Maintenance: Engineers can replace the 8C-PDODA1 without powering down the entire I/O rack. This capability prevents costly process interruptions and maintains system uptime during routine hardware updates.
High-Density Small Footprint: By packing 32 channels into a compact C300 form factor, this module reduces the physical space required in control cabinets. It simplifies wiring for large-scale deployments in offshore platforms or cramped manufacturing floors.
Advanced Fault Tolerance: The module integrates directly with redundant I/O power supplies and controllers. It monitors individual channel health and reports diagnostics to the Experion PKS console, allowing operators to identify field-side wiring faults before they cause a system trip.
Rigorous Environmental Hardening: Designed to withstand extreme temperatures (–20 °C to +70 °C), the hardware thrives in non-climate-controlled marshaling cabinets, ensuring signal integrity in harsh chemical processing zones.
Q: Can the 8C-PDODA1 51454472-175 operate in a redundant configuration?
A: Yes. This module fully supports Honeywell’s redundant I/O architecture. When paired with a second module in a redundant C300 I/O base, the system ensures seamless failover, maintaining output states even if one module fails.
Q: What is the maximum current capacity per channel for driving field loads?
A: Each channel provides up to 0.5 A at 24 VDC. This rating allows the module to drive most standard industrial solenoids and interposing relays directly without additional amplification hardware.
Q: Does this module require specific firmware versions on the C300 controller?
A: Compatibility depends on your Experion PKS software release. Always verify that your current Fieldbus Interface Module (FIM) and C300 firmware support the 8C-PDODA1 hardware revision to ensure full diagnostic functionality.
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.