FBM219 P0917LH0C Foxboro Discrete I/O Module

Foxboro FBM219 P0917LH0C I/A Series Discrete I/O Module

Foxboro FBM219 P0917LH0C I/A Series Discrete I/O Module

Availability: 10 left in stock

Foxboro FBM219 P0917LH0C I/A Series Discrete I/O Module The Foxboro FBM219 P0917LH0C, also cataloged as the FBM219 Discrete I/O Interface...

SKU: P0917LH 0C

Manufacturer: Foxboro
Product No.: P0917LH 0C
Product Type: Digital I/O Cards
Product Origin: USA
Payment:T/T, Western Union
Weight: 320g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro FBM219 P0917LH0C I/A Series Discrete I/O Module

The Foxboro FBM219 P0917LH0C, also cataloged as the FBM219 Discrete I/O Interface Module, operates as a dedicated hardware component for high-density digital signal processing and event recording within Foxboro I/A Series DCS networks. The module monitors field contact states and drives discrete control outputs across dual redundant 24 VDC backplane power buses.

Hardware Specifications

Parameter	Specification
Model	FBM219 P0917LH0C
Brand	Foxboro (Schneider Electric)
Origin	USA
Weight	0.32 kg
Dimensions	4.6 cm x 11.0 cm x 11.5 cm
Operating Temp	-20 deg C to +70 deg C
Power Consumption	8.5 W max
Channel Density	32 discrete channels (24 inputs, 8 outputs)
Input Voltage Support	30 VDC, 125 VDC, 120/240 VAC
SOE Resolution	1 ms time-stamping
Input Filtering	Software-selectable 4 ms to 255 ms debounce
Isolation Voltage	600 VAC channel-to-earth, group-to-group
Power Supply	24 VDC redundant input via baseplate

Channel-to-Channel Isolation & Sequence of Events Recording

The FBM219 P0917LH0C incorporates galvanically isolated group structures rated for 600 VAC isolation between input channels and internal logic circuits. This isolation suppresses common-mode ground noise and prevents high-voltage field surges from degrading DCS backplane communications. Integrating continuous 1 ms Sequence of Events (SOE) resolution, the internal digital processing unit timestamps state transitions at the module level prior to transmitting buffered diagnostic packets over the system bus.

Frequently Asked Questions

Q: How does the module process different field voltage levels across the 32 channels?

A: Input channels accept field discrete signals operating at 30 VDC, 125 VDC, or 120/240 VAC. The module conditions these signals down to system logic levels (High >15 VDC, Low <5 VDC) while maintaining galvanic isolation across channel groups.

Q: Can the FBM219 be hot-swapped during active system operations?

A: Yes, operators can perform live hot-swapping on the active baseplate without disrupting adjacent operational I/O modules or interrupting backplane communication traffic.

Q: What termination hardware is required to wire field devices to this module?

A: The module requires interface integration with the dedicated P0917LH external termination assembly to correctly route field wiring to the backplane connectors.

Field Installation Guidelines

Observe the following field installation procedures during system panel wiring and hardware integration:

Insert the FBM219 module into its assigned baseplate slot until the upper and lower retaining latches lock firmly.
Route high-voltage AC field lines away from low-voltage digital signal wiring inside the enclosure raceways to minimize inductive coupling.
Terminate field fieldbus cables directly to the associated P0917LH termination assembly according to channel assignment schematics.
Ensure the enclosure maintains clean airflow and operates within the environmental temperature window of -20 deg C to +70 deg C.
Ground all cable shielding at the designated panel ground bus to provide a low-impedance earth return path for transient voltage spikes.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.