P0916KH Foxboro Termination Assembly

Foxboro P0916KH P0916KH-0B I/A Series Termination Assemblies

Foxboro P0916KH P0916KH-0B I/A Series Termination Assemblies

Availability: 10 left in stock

Foxboro P0916KH I/A Series Termination Assembly The Foxboro P0916KH, also cataloged as the P0916KH-0B Termination Assembly, operates as a dedicated...

SKU: P0916KH

Manufacturer: Foxboro
Product No.: P0916KH
Product Type: Termination Assemblies
Product Origin: USA
Payment:T/T, Western Union
Weight: 3200g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro P0916KH I/A Series Termination Assembly

The Foxboro P0916KH, also cataloged as the P0916KH-0B Termination Assembly, operates as a dedicated hardware component for wiring termination and field signal routing within Foxboro I/A Series DCS networks. It accepts up to 24 channels of field wiring to interface 4-20 mA, RTD, thermocouple, and discrete signals directly to paired Fieldbus Modules (FBMs). The assembly maintains galvanic isolation between field conductors and system logic buses while executing signal conditioning across industrial loops.

Hardware Specifications

Parameter	Specification
Model	P0916KH
Brand	Foxboro (Schneider Electric)
Origin	USA
Weight	Standard Termination Assembly footprint
Dimensions	Standard Foxboro I/A Series TA mounting footprint
Operating Temp	-20 to +70 deg C
Power Consumption	Passive field terminal interface
Channels Supported	Up to 24 channels (FBM dependent)
Signal Types	4-20 mA, RTD, Thermocouple, Discrete Signals
Isolation	Galvanic isolation between field wiring and logic
Connector Type	Removable terminal blocks (spring clamp or screw type)
Wiring Capacity	18 to 22 AWG copper conductors
Enclosure Rating	IP20
Mounting	Standard 35 mm DIN rail or panel baseplate

Cold Junction Compensation & Channel-to-Channel Isolation

The Foxboro P0916KH incorporates onboard cold junction compensation (CJC) temperature sensors directly adjacent to thermocouple terminal blocks. This architecture compensates for ambient thermal gradients across field connections, eliminating thermoelectric potential errors prior to signal digitization by host FBM units. Combined with channel-to-channel galvanic isolation paths, the assembly prevents ground loop currents, suppresses industrial common-mode noise, and maintains signal integrity for low-millivolt input loops across process control networks.

Frequently Asked Questions

Q: Does the P0916KH termination assembly require active configuration software or field calibration?

A: No, the assembly is a hardware connection interface and does not require calibration. Signal scaling and channel configuration are managed directly within the host Foxboro I/A Series DCS software tools upon assignment to the corresponding FBM module.

Q: Can terminal wiring be serviced without disconnecting individual field conductors?

A: Yes, the unit utilizes removable terminal block assemblies (spring clamp or screw type) that allow field wiring harnesses (18 to 22 AWG) to remain wired during module replacement.

Field Installation Guidelines

Mount the termination assembly chassis onto a standard 35 mm DIN rail or secure it to a panel baseplate inside a protective IP54 enclosure. Maintain a minimum vertical spacing of 50 mm above and below the block to support convection cooling and ensure adequate wire duct clearance.

Route low-voltage analog signal cables separately from high-voltage power lines. Strip field conductors to manufacturer specifications and secure them into the 18 to 22 AWG removable terminal blocks using standard torque limits. Connect cable shields to the dedicated cabinet ground bus at a single ground point to maintain galvanic isolation and suppress electromagnetic interference. Secure the interface cable linking the P0916KH termination assembly directly to the corresponding FBM baseplate port.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.