P0927AQ Foxboro FPS Power Cable Module

Foxboro P0927AQ I/A Series 110/240 VAC FPS Power Cable

Foxboro P0927AQ I/A Series 110/240 VAC FPS Power Cable

Availability: 10 left in stock

Foxboro P0927AQ I/A Series Power Cable Module The Foxboro P0927AQ, also cataloged as the P0927AQ FPS Power Cable, operates as...

SKU: P0927AQ

Manufacturer: Foxboro
Product No.: P0927AQ
Product Type: Power Cables
Product Origin: USA
Payment:T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Foxboro P0927AQ I/A Series Power Cable Module

The Foxboro P0927AQ, also cataloged as the P0927AQ FPS Power Cable, operates as a dedicated hardware component for AC auxiliary mains power distribution within Foxboro I/A Series DCS platforms. Designed for dual-voltage 110/240 VAC power feeds, this assembly connects line power directly to Field Processor System (FPS) power modules, enabling continuous bus energization across industrial control cabinets.

Hardware Specifications

Parameter	Specification
Model	P0927AQ
Brand	Foxboro (Invensys / Schneider Electric)
Origin	USA
Weight	0.5-1.0 kg
Dimensions	6 ft Length
Operating Temp	-20 to +70 deg C
Power Consumption	Passive Power Conductor
Voltage Rating	110/240 VAC
System Compatibility	Foxboro I/A Series FPS Power Modules
Cable Length	6 ft (1.83 m)
Humidity Range	5% to 95% RH, non-condensing
Protection Level	Industrial-Grade Heavy Insulation
Mounting	Internal Cabinet Routing / Plug Interconnect
Certifications	UL, CSA Compliance

DCS Power Distribution and Signal Integrity

The Foxboro P0927AQ supplies isolated AC power to FPS modules powering underlying I/A Series field bus card sub-racks. While feeding primary AC voltage, internal channel-to-channel isolation within downstream FBM signal modules prevents common-mode noise from coupling back into field loop channels. Overlaid 4-20 mA HART loop protocol signals remain stable due to low thermal dissipation and shielded conductor routing inside high-density automation enclosures.

Frequently Asked Questions

Q: Can the P0927AQ power cable be connected or disconnected while the FPS power supply module is energized?

A: Technicians must isolate the main AC circuit breaker prior to connecting or disconnecting the P0927AQ power cable assembly to prevent electrical arcing across high-voltage pin terminals.

Q: How does the cable handle dual-voltage supply changes between 110 VAC and 240 VAC systems?

A: The physical cable structure supports both 110 VAC and 240 VAC line voltages without requiring internal jumpers or external voltage adapters, provided the downstream FPS power module matches incoming line levels.

Field Installation Guidelines

Power Isolation: Verify that the main AC feed circuit breaker is open and tagged out before routing or terminating the cable inside the enclosure.
Cable Routing: Lay the 6-foot cable assembly along designated cabinet wire ducts. Maintain a minimum distance of 12 inches between AC power cables and sensitive low-voltage analog field wiring to suppress electromagnetic interference.
Connector Seating: Push the connector housing firmly into the mating header of the FPS module until internal locking tabs engage completely.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.