Email: spareoil.com@industriaxplc.com
Description
The Siemens 6ES5721-0BC00 is a specialized 2-meter, 50-pin industrial interconnect cable engineered for the Simatic S5 automation series. Designed to facilitate robust data transmission between central controllers and remote expansion units, this cable ensures reliable communication across distributed rack configurations. It is a critical component for maintaining consistent I/O refresh cycles in complex industrial environments, including power generation, manufacturing, and process control facilities.
Features
- High-density 50-pin interface for parallel data, address, and control signal transmission.
- Shielded multi-conductor design to mitigate EMI and RFI interference in high-noise environments.
- Ruggedized connector housings equipped with integrated strain relief and retention screws.
- Optimized for signal integrity and timing synchronization in split-rack architectures.
- Passive assembly requiring no external power supply for operation.
Applications
This interconnect cable is primarily used in Simatic S5 systems to bridge the gap between main processing racks and decentralized expansion chassis. It is suitable for long-distance distributed I/O setups where deterministic communication is required to prevent system faults or signal degradation.
Technical Specifications
| Model | 6ES5721-0BC00 |
| Cable Length | 2 meters |
| Connector Type | 50-Pin Male-to-Female |
| Operating Temperature | 0 to 60 deg C |
| System Compatibility | Siemens Simatic S5 |
| Maximum System Extension | Up to 600 meters (with compatible amplifiers) |
Installation Guidelines
- Ensure the system is powered down before connecting or disconnecting the 50-pin interface to prevent potential electrical shorts or damage to backplane pins.
- Align connectors carefully to avoid bending pins; secure the manual retention screws firmly to ensure a gas-tight, vibration-resistant connection.
- Route the cable away from high-voltage power lines and heavy-duty motor starters to minimize the risk of inductive noise coupling.
- Maintain proper bend radii during installation to prevent internal conductor fatigue or shield damage.
- Periodically inspect the connector shells and cable jacket for signs of wear, chemical exposure, or mechanical stress in harsh industrial environments.
FAQ
Is this cable shielded against electromagnetic interference? Yes, the 6ES5721-0BC00 features a multi-layered shielding design, including aluminum foil and a tinned copper braid, to protect signals from common-mode noise.
Does this cable require any configuration in the PLC software? No, this is a passive physical interconnect cable. It serves as the transmission medium for the backplane bus, and no software configuration is required for the cable itself.
Can I use this cable for extensions beyond 2 meters? The cable itself is a fixed 2-meter length. For total system distribution distances up to 600 meters, additional active line amplifiers and appropriate cabling segments are required within the Simatic S5 architecture.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
