330103-00-04-10-01-00 Bently Nevada Probe

330103-00-04-10-01-00 Bently Nevada 3300 XL 8 mm Proximity Probes

330103-00-04-10-01-00 Bently Nevada 3300 XL 8 mm Proximity Probes

التوفر: 10 متوفر في المخزون

The Bently Nevada 330103-00-04-10-01-00, also cataloged as the 330103 Proximity Sensors, operates as a dedicated hardware component for non-contact shaft...

رمز المنتج: 330103-00-04-10-01-00

Manufacturer: Bently Nevada
Product No.: 330103-00-04-10-01-00
Product Type: Proximity Sensors
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

The Bently Nevada 330103-00-04-10-01-00, also cataloged as the 330103 Proximity Sensors, operates as a dedicated hardware component for non-contact shaft vibration and displacement measurement within 3300 XL Transducer System platforms. It projects an alternating radio frequency field through its polyphenylene sulfide tip to track relative target distance against rotating machinery shafts.

Suffix Breakdown & Model Matrix

Option Code	Designation	Parameter Value / Option Description
330103	Base Model	3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread
-00	Unthreaded Length Option	0.0 in
-04	Overall Case Length Option	40 mm
-10	Total Length Option	1.0 meter (3.3 feet)
-01	Connector and Cable Type Option	Miniature coaxial ClickLoc connector with connector protector, standard cable
-00	Agency Approval Option	Not required

Hardware Specifications

Parameter	Specification
Model	330103-00-04-10-01-00
Base Model	330103
Brand	Bently Nevada
Series	3300 XL 8 mm
Product Type	Proximity Sensors
Origin	USA
Case Geometry & Threading	3/8-24 UNF thread, 40 mm overall case length, 0.0 in unthreaded length
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 303 or 304 stainless steel (SST)
Total Cable Length	1.0 meter (3.3 feet)
Connector & Cable Type	Miniature coaxial ClickLoc connector with connector protector, standard cable
Agency Approvals	Not required (-00 option)
Operating Temp	-51 to +177 deg C (Standard probe operating envelope)
Power Consumption	Passive physical component (0 W)
Dimensions	Standard 8 mm probe tip diameter, 40 mm case length
Weight	0.423 kg (Net Weight) / 1.5 kg (Shipping Weight)

Eddy-Current Probe Scaling & Rotor Dynamics

The 330103-00-04-10-01-00 probe works in conjunction with a matching extension cable and Proximitor sensor to provide standardized eddy-current probe scaling at a linear sensitivity of 7.87 V/mm (200 mV/mil). During dynamic system setup, gap voltage validation targeting -10 VDC at the physical shaft centerline ensures maximum dynamic range for peak-to-peak vibration excursions. Correct physical alignment prevents saturation under high shaft displacement and maintains cross-talk suppression between orthogonal probe pairs installed for rotor dynamics tracking.

Frequently Asked Questions

Q: What function does the factory-installed connector protector serve on option -01?

A: The connector protector seals the ClickLoc miniature coaxial interface against environmental contaminants such as oil and moisture while insulating the coaxial shield from unintentional grounding against the machine housing.

Q: Can this 1.0-meter probe cable connect directly to a 5.0-meter Proximitor sensor?

A: No, a 1.0-meter probe requires a matching 4.0-meter extension cable to complete the total 5.0-meter system length required for accurate electrical calibration of the Proximitor sensor.

Q: What is the mechanical thread specification for the 330103 base model?

A: The 330103 series probe casing features a standard 3/8-24 UNF external thread along its stainless steel body.

Field Installation Guidelines

Clean the 3/8-24 UNF tapped hole and check for burrs or thread damage prior to probe insertion.
Thread the 40 mm probe body into the mounting hole by hand until the polyphenylene sulfide tip nears the shaft target face.
Power the associated 3300 XL Proximitor sensor and monitor DC voltage output; adjust probe position to achieve the target -10 VDC gap voltage baseline at physical shaft center.
Tighten the probe locknut against the mounting bracket face to lock physical position without applying rotational torque to the cable lead exit.
Connect the ClickLoc miniature coaxial connector to the extension cable lead, ensure the locking collar clicks into position, and slide the protective connector boot over the connection point.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.