Chassis Power Supply 120V 6A 5V/24V | Honeywell 51195066-100

Availability: 20 left in stock

Product Overview The 51195066-100 is a multi-output industrial power supply unit specifically engineered for Honeywell TDC 3000 and Experion PKS control chassis....

SKU: 51195066-100

Manufacturer: Honeywell
Product No.: 51195066-100
Product Type: Chassis Power Supply
Product Origin: USA
Payment:T/T, Western Union
Weight: 800g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Product Overview

The 51195066-100 is a multi-output industrial power supply unit specifically engineered for Honeywell TDC 3000 and Experion PKS control chassis. As an authoritative power source for mission-critical automation, this module provides the diverse voltage rails required to energize controllers, high-density I/O modules, and backplane logic. The 51195066-100 is a mechanical necessity for systems requiring synchronized time-stamping, featuring jumper-selectable clock configurations for Sequence of Events (SOE) functionality. Designed for continuous service in refineries and power generation facilities, it delivers high-current 5VDC and 24VDC outputs to maintain the electrical integrity of distributed control system nodes.

Detailed Technical Specifications

(Note: Technical correction applied—the 51195066-100 is a multi-rail chassis supply featuring four distinct DC outputs to support legacy and modern backplane logic.)

Attribute	Details
Manufacturer	Honeywell
Model Number	51195066-100
Product Type	5-Slot Chassis Power Supply
Input Voltage	120 / 240 VAC (Auto-sensing/Selectable)
Input Frequency	47–63 Hz
Input Current	6.0A (at 120V) / 3.75A (at 240V)
DC Output 1	5 VDC at 30.0 A
DC Output 2	+12 VDC at 8.0 A
DC Output 3	-12 VDC at 1.0 A
DC Output 4	+24 VDC at 1.0 A
Connector Type	Original 8-pin high-current interface
Clock Sync	Jumper selectable (Internal Line Freq or External Source)
Operating Temp	-40 °C to +85 °C
Weight	0.8kg
Certifications	UL, Industrial Compliance

Installation Guide

Pre-Installation Verification: Ensure the input voltage selector (if applicable) matches the 120V or 240V site power. Confirm the module is a trustworthy replacement for discontinued units like 51400712-100.
Chassis Alignment: Align the 51195066-100 with the dedicated power supply slot in the Honeywell 5-slot chassis.
Seating and Securing: Push the module firmly into the backplane until the 8-pin connector is fully engaged. Secure the module using the chassis retention screws to maintain a trustworthy electrical bond against industrial vibration.
Clock Configuration: Before power-up, set the internal jumper for clock synchronization. For systems utilizing Sequence of Events (SOE), align the jumper with the site's master clock requirements (Line Frequency or External).
Power-Up Sequence: Apply AC power and verify the front-panel LED indicators. A successful installation is confirmed when all status lights indicate active DC rails.
Hot-Swap Procedure: If replacing a module in a redundant configuration, the 51195066-100 can be swapped without powering down the entire chassis, a mechanical necessity for 24/7 uptime.

Technical FAQ

What systems are compatible with the 51195066-100?

It is primarily designed for the Honeywell TDC 3000 High-Performance Process Manager (HPM) and Experion PKS chassis that require a multi-rail supply for legacy backplane support.

Does this module support Sequence of Events (SOE) recording?

Yes. The 51195066-100 is an authoritative component for SOE, as it provides the line-frequency clock synchronization signal across the chassis backplane when the internal jumper is correctly configured.

How does the 30A rating on the 5V rail affect performance?

The 30A capacity on the 5VDC rail is a mechanical necessity for powering fully populated 5-slot chassis containing high-speed processors and dense communication modules, ensuring a trustworthy voltage level under peak load.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.