DS200RTBAG2AHC GE Relay Terminal Board

DS200RTBAG2AHC GE Fanuc Relay Terminal Board

DS200RTBAG2AHC GE Fanuc Relay Terminal Board

Availability: 10 left in stock

The GE Fanuc DS200RTBAG2AHC, also cataloged as the DS200RTBA Relay Terminal Board, operates as a dedicated hardware component for relay...

SKU: DS200RTBAG2AHC

Manufacturer: General Electric
Product No.: DS200RTBAG2AHC
Product Type: Relay Terminal Boards
Product Origin: China
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The GE Fanuc DS200RTBAG2AHC, also cataloged as the DS200RTBA Relay Terminal Board, operates as a dedicated hardware component for relay output switching and terminal control within Mark V Speedtronic platforms.

Suffix Breakdown & Model Matrix

The part number DS200RTBAG2AHC designates specific coil voltage levels and accumulated engineering revisions:

DS200: Standard Mark V series printed circuit board base platform.
RTBA: Functional acronym designating the Relay Terminal Board module.
G2: Group 2 designation specifying 24 VDC relay coil operating voltage.
A: 1st functional design revision level.
H: 2nd functional design revision level.
C: Artwork configuration revision level.

Hardware Specifications

Parameter	Specification
Model	DS200RTBAG2AHC
Brand	GE Fanuc
Origin	USA
Operating Temp	0 to 60 deg C
Power Consumption	Coil Voltage Driven (24 VDC)
Total Onboard Relays	10 Relays (7 x DPDT with 2 Form-C contacts, 3 x 4PDT)
Relay Coil Voltage	24 VDC
Circuit Protection	Dedicated 130 V AC Metal Oxide Varistors (MOVs) per relay
Visual Diagnostics	Onboard status lamps per relay (glows when energized)
Connectors	2 x Stab Connectors, 1 x 16-Pin Connector, 1 x 2-Pin Connector

Backplane Bus Communication & Firmware Compatibility

The GE Fanuc DS200RTBAG2AHC interfaces with central processor cards through multi-pin ribbon cables to process remote I/O terminal control and LAN switching signals. Deterministic routing across the control backplane ensures zero operational latency during discrete relay state transitions. Onboard berg-type jumper pins allow manual circuit path selection and address configuration, preserving full firmware flash compatibility with upstream Mark V drive control assemblies.

Frequently Asked Questions

Q: How does the DS200RTBAG2AHC differ from RTBAG1 and RTBAG3 terminal board variants?

A: The Group 2 (G2) designation specifies a 24 VDC coil operating voltage, whereas RTBAG1 boards utilize 110 VDC coils and RTBAG3 boards operate on 115 VAC coil supply voltages.

Q: What transient protection mechanisms are built into the board's relay circuits?

A: Every onboard relay is protected by an individual 130 V AC Metal Oxide Varistor (MOV) wired across the circuit; these components absorb voltage surges and are individually replaceable if damaged.

Q: Can this board be used as a direct replacement for earlier DS200RTBAG2 revisions?

A: Yes, the DS200RTBAG2AHC incorporates three factory revisions and maintains full backwards compatibility with the first two production revision levels of the DS200RTBAG2 parent board.

Field Installation Guidelines

Power Isolation: Ensure all 24 VDC coil power supplies and external contact load voltages are completely disconnected and verified zero-voltage prior to handling the module.
ESD Safe Handling: Personnel must wear a grounded wrist strap connected to an unpainted panel earth point before touching board components or terminal contacts.
MOV Inspection: Inspect the ten 130 V AC MOVs visually for discoloration or physical degradation before installing the board into the cabinet rail mount.
Cable Termination: Seat the 16-pin ribbon connector and 2-pin connector firmly onto header pins. Ensure fast-on stab connectors are securely locked to prevent high-resistance contact points.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.