DS200TCPAG1AJD GE Control Processor Board

DS200TCPAG1AJD | GE | Mark V CONTROL PROCESSOR BOARD

DS200TCPAG1AJD | GE | Mark V CONTROL PROCESSOR BOARD

Availability: 10 left in stock

The GE DS200TCPAG1AJD, also cataloged as the DS200TCPA Control Processor Board, operates as a dedicated hardware component for central processing...

SKU: DS200TCPAG1AJD

Manufacturer: General Electric
Product No.: DS200TCPAG1AJD
Product Type: Control Processor Boards
Product Origin: China
Payment:T/T, Western Union
Weight: 750g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The GE DS200TCPAG1AJD, also cataloged as the DS200TCPA Control Processor Board, operates as a dedicated hardware component for central processing and power distribution execution within GE Speedtronic Mark V control platforms.

Hardware Specifications

Parameter	Specification
Model	DS200TCPAG1AJD
Brand	General Electric
Origin	United States
Weight	0.75 kg
Dimensions	Standard Mark V Non-VME PCB Form Factor
Operating Temp	0 to 60 deg C
Power Consumption	125 VDC Input
Functional Acronym	TCPA
Series	Mark V
PCB Coating	Normal conformal coating
Mounting Style	Direct panel mount (Non-VME rack, no metal faceplate)
Protection	Fuses with dedicated LED status monitoring

Firmware Flash Compatibility & Backplane Bus Interconnection

The DS200TCPAG1AJD resides directly within the Mark V control panel architecture rather than standard VME rack chassis. Inter-board data transfer relies on ribbon cable harnesses and power distribution trunks, requiring strict firmware flash compatibility across connected processing nodes to prevent bus synchronization errors. Internal board traces are optimized to maintain processing velocity and deterministic execution cycles without thermal-induced timing drift. The integrated normal conformal coating shields surface-mount components from particulate contamination, ensuring stable signal routing across local distribution networks.

Frequently Asked Questions

Q: How does the DS200TCPAG1AJD handle electrical fault detection on its power distribution circuits?

A: The board incorporates onboard fuses on its 125 VDC power paths, each paired with an LED fault indicator that illuminates to provide immediate physical verification when a fuse opens.

Q: Why does the board lack a standard metallic mounting faceplate?

A: The unit is designed for direct mounting within the core Mark V cabinet enclosure rather than a standard VME card cage, utilizing specialized mounting points to establish direct chassis ground continuity.

Field Installation Guidelines

Isolate the main panel and confirm total de-energization of all 125 VDC supply lines prior to handling the board.
Wear an ESD wrist strap bonded to the panel chassis ground to prevent static discharge to exposed integrated circuits.
Position the board onto the designated panel standoffs inside the Mark V core cabinet and tighten retaining hardware securely.
Connect all power distribution harnesses and ribbon cables, ensuring proper pin alignment and locking connector engagement.
Apply 125 VDC input power and observe all LED fuse indicators; ensure no failure LEDs illuminate before initializing system startup.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.