DS200PCCAG7ACB GE Power Connect Card

GE DS200PCCAG7ACB DC2000 Power Connect Card

GE DS200PCCAG7ACB DC2000 Power Connect Card

Availability: 10 left in stock

Configured for power conversion control and firing pulse interface execution in GE DC2000 drive systems, the GE DS200PCCAG7ACB (DS200PCCA Power...

SKU: DS200PCCAG7ACB

Manufacturer: General Electric
Product No.: DS200PCCAG7ACB
Product Type: Power Distribution Boards
Product Origin: China
Payment:T/T, Western Union
Weight: 500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Configured for power conversion control and firing pulse interface execution in GE DC2000 drive systems, the GE DS200PCCAG7ACB (DS200PCCA Power Connect Card) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

Part Number Segment	Specification Detail	Technical Description
DS200	Series Identifier	Standard Mark V / DC2000 board base classification
PCCA	Functional Acronym	Power Connect Card functional designation
G7	Assembly Group	Group 7 configuration (C/G frame, AC/DC snubbers, <600 V rms AC)
ACB	Revision Matrix	Functional Rev A, Functional Rev C, Artwork Rev B

Hardware Specifications

Parameter	Specification
Model	DS200PCCAG7ACB
Brand	GE Industrial Control Systems
Origin	USA
Weight	0.50 kg
Dimensions	8.5 in x 11.0 in (21.6 cm x 27.9 cm)
Operating Temp	0 to 60 deg C
Power Consumption	System power supplied via SDCI board interface
Series	DC2000
AC Line Rating	Less than 600 V rms AC
Board Coating	Normal Coating
Manual Reference	GEI-100161
Frame Compatibility	Frame style C or G
Onboard Protection	Integrated AC/DC snubbers and pulse transformers
Hardware Jumpers	4 Configurable Jumpers (JP1, JP2, WP3, WP4)

Firmware Flash Compatibility and I/O Density Scaling

The DS200PCCAG7ACB establishes a hardware-level bridge between the SDCI power supply board and the SCR power bridge. Configured for system voltages below 600 V rms AC across C and G frame drives, the board routes gating command pulses and feedback signals using integrated pulse transformers and snubber networks. Jumpers JP1 and JP2 connect to designated stab terminals (P3 through P10), while jumpers WP3 and WP4 conjoin internal circuit paths P2A/P2B and P1A/P1B. Because the card executes signal distribution through hardwired components, it operates independent of software programming, maintaining complete firmware flash compatibility across DC2000 drive control architectures.

Frequently Asked Questions

Q: Can onboard components on the DS200PCCAG7ACB be repaired or serviced individually?

A: No. The DS200PCCAG7ACB contains no user-serviceable components and is non-repairable. If unexpected behavior or hardware failure occurs, the complete board assembly must be replaced.

Q: What determines the Group 7 (G7) designation for this specific PCCA module?

A: Group 7 designation specifies compatibility with C or G frame drives operating under 600 V rms AC, incorporating AC/DC snubber circuits, line fuses, reactors, and direct interface capability with SDCI power supply boards.

Field Installation Guidelines

Lock out and isolate all main AC power lines and DC control supplies feeding the DC2000 drive system prior to panel access.
Wear an ESD grounding strap attached to a cabinet earth ground point to protect sensitive onboard components during handling.
Align the 8.5 in x 11 in board with chassis standoffs and tighten mounting hardware securely to establish solid ground contact.
Position jumpers JP1, JP2, WP3, and WP4 to match the exact hardware pin configuration of the original module.
Connect stab terminals P3 through P10 and mating interface headers, ensuring positive connection before applying line voltage.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.