KS1-10*B Yokogawa CENTUM VP 40-Pin 10m Signal Cables

Availability: 20 left in stock

Yokogawa KS1-10*B CENTUM VP Signal Cable The Yokogawa KS1-10*B, also cataloged as the KS1 Signal Cable (40-40 pins), operates as...

SKU: KS1*B-10 B

Manufacturer: Yokogawa
Product No.: KS1*B-10 B
Product Type: Signal Cables
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa KS1-10*B CENTUM VP Signal Cable

The Yokogawa KS1-10*B, also cataloged as the KS1 Signal Cable (40-40 pins), operates as a dedicated hardware component for 40-pin to 40-pin point-to-point analog and digital signal interconnectivity within Yokogawa CENTUM VP, CS3000, and CS1000 distributed control system networks.

Suffix Breakdown & Model Matrix

Model / Suffix Code	Specification
KS1	Signal Cable Base Model (40-pin to 40-pin connector layout)
-10	Cable Length Option (10 m fixed length)
*B	Style Code B Design Revision

Hardware Specifications

Parameter	Specification
Model	KS1-10*B
Brand	Yokogawa
Origin	Japan / China
Weight	2.0 kg (Shipping Weight)
Dimensions	10 m length (Outer Diameter: 12 mm nominal)
Operating Temp	-20 deg C to +70 deg C
Power Consumption	Passive signal conductor (0 W self-consumption)
Connector Type	40-pin to 40-pin male/female industrial ribbon connectors
Shielding Type	High-density braided shield (EMI resistant)
Platform Compatibility	Yokogawa CENTUM VP, CS3000, CS1000 systems

4-20 mA Loop Signal Integrity & Galvanic Shielding

The KS1-10*B cable transfers high-density analog measurement signals across 4-20 mA HART loop protocol configurations between field terminal boards and DCS input modules. Multi-strand shielded twisted pairs maintain low conductor resistance and minimize crosstalk, preventing common-mode noise insertion into sensitive signal lines. Channel-to-channel isolation is preserved through grounded overall foil and braid shields, protecting connected control nests against field ground potential variations and industrial electromagnetic interference.

Frequently Asked Questions

Q: What is the maximum allowable bend radius for the KS1-10*B signal cable during cabinet installation?

A: Maintain a minimum internal bend radius of 60 mm (5 times outer cable diameter) to prevent mechanical strain on internal conductors and braided shielding wires.

Q: Can the 40-pin connectors on the KS1-10*B cable be plugged or unplugged while backplane I/O power is active?

A: Hot-swapping field terminal wiring connections depends on the specific connected I/O module specifications; however, standard procedure requires locking side retention screws prior to energizing field loops.

Field Installation Guidelines

Route the KS1-10*B cable through separate wire ducts or tray divisions distinct from AC power cables and high-voltage drive outputs. Inspect pin alignment prior to inserting the 40-pin connectors into terminal board sockets or I/O module headers, and tighten all integrated retaining hardware to ensure stable electrical contact under plant vibration conditions.

Bond the overall cable braid shield to the designated cabinet earth bus at a single grounding point to avoid forming ground loops. Maintain operating ambient conditions within -20 deg C to +70 deg C, and prevent cable contact with sharp sheet metal edges inside control enclosures.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.