MUDA Yokogawa CENTUM VP ProSafe-RS Terminal Board

Availability: 99 left in stock

Yokogawa MUD*A CENTUM VP Terminal Board Configured for specific technical task execution in CENTUM VP, ProSafe-RS, and SCADA architectures, the...

SKU: MUD*A

Manufacturer: Yokogawa
Product No.: MUD*A
Product Type: Terminal Boards
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 1300g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa MUD*A CENTUM VP Terminal Board

Configured for specific technical task execution in CENTUM VP, ProSafe-RS, and SCADA architectures, the Yokogawa MUD*A (Yokogawa MUD*A Terminal Board) provides direct physical/electrical execution of field signal termination routing. The unit manages analog, digital, and thermocouple wiring loops before routing signals directly to matching internal system input modules.

Hardware Specifications

Parameter	Specification
Model	MUD*A
Brand	Yokogawa
Origin	Japan
Weight	1.3 kg
Dimensions	100 x 75 x 25 mm
Operating Temp	-20 to +60 deg C
Power Consumption	Passive component (negligible)
Number of Terminals	32 screw-type terminals (up to 64 wire points)
Wire Gauge Compatibility	24 AWG to 14 AWG
Current Rating	Up to 3 A per terminal
Voltage Rating	Up to 250 VAC/VDC
Insulation Resistance	Minimum 100 MΩ at 500 VDC
Withstand Voltage	500 VAC for 1 minute

Process Control Integration & Signal Isolation

The interface board processes diverse external electrical paths using built-in channel-to-channel isolation matrices to eliminate ground differentials. The copper trace routing maintains strict 4-20 mA HART loop protocol signal transparency, permitting high-frequency digital communication to pass onto the host distributed control system. For mixed temperature loops, integrated cold junction compensation (CJC) circuits generate continuous reference adjustments, ensuring precision measurement stability for connected thermocouple sensors.

Frequently Asked Questions

Q: Can an engineer swap this board while the active control loops are energized? A: The hardware does not support hot-swap insertion or extraction under load. Operational safety constraints demand that technicians fully de-energize all connected 250 VAC/VDC field lines before performing any replacement or maintenance activities.

Q: How does the assembly handle mechanical energy in close proximity to rotating machinery? A: The physical chassis structure passes independent type testing for shock and vibration, withstanding peak displacements of 0.5 mm P-P across 0 to 14 Hz frequencies and shock decelerations up to 5 g for 11 ms durations.

Q: Is a battery configuration necessary to maintain active configuration loops during power failure? A: The hardware operates as a purely passive distribution network requiring zero continuous operational current. All calibration parameters and reference thresholds depend entirely on the host distributed control system memory.

Field Installation Guidelines

Chassis Fastening: Anchor the module structure onto standard symmetric DIN rails or bolt it securely onto the back panel layout of the cabinet enclosure. Confirm all tracking clips click firmly to establish structural integrity.
Signal Separation: Run analog, digital, and thermocouple sensor field cabling in isolated conduit groups. Maintain physical distance thresholds between high-voltage power distribution conduits and low-level analog cables to minimize cross-talk risks.
Ground Earth Connection: Connect all external braided cable shields directly to the designated functional earth bar of the cabinet housing. Ensure the common ground pathway exhibits less than 1 ohm impedance to avoid high-frequency electrical interference.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.